On 1/24/2013 8:40 PM, Jay wrote:
I assume from the schematics for 240V operation, the KPA500 is wired across the two 120V legs to create the 240V
Right.
(with no return line).
The other side of 240 V IS the return line. Neutral is NOT used for 240V equipment. Neutral WOULD be necessary if the equipment also needed 120V to operate, but ONLY if that was the case, and a 4-wire plug would be required.
I understand the safety wire is another lead.
Yes, and it's the green wire and goes to the chassis. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
