They have been humming along for a yr. I'm not computer savy so with help from my friend Jamie I was up and going. Three days ago my outboard keyer died. I pulled the K3 forward on the desk to plug in my spare keyer. [I prefer an outboard keyer]. When all was connected & the radio pushed back in position the K3 & KPA500 are not talking. I get no message on the K3 display the KPA is on. The amp is just bypassing RF. The KPA displays the K3 output power but when I key the amp sits in standby.The band following is not working. They just are not communicating. Jamie suggested unplugging all the interconnect cables & reinserting them in the K3 & KPA. Maybe a lost connection. That had no effect. I'm open to suggestions as a starting point or if anyone else has experienced this & how they resolved the problem. I want to get the KPA going as I have a new KAT500 in a box on the shack floor.
TNX K9IL ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected]
This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
