I've had the same problem before, but it was always one or more of the following:
Broken or not properly soldered wire inside one of the connectors to/from the K3/transverter; K3's XV1/XV2 address doesn't match the dip switches inside the transverter(s); Transverter didn't have power available to them prior to turning on the K3. Check those, and you'll probably find the problem. 73 de Sebastian, W4AS On Aug 16, 2012, at 3:52 AM, eric norris <[email protected]> wrote: > I have had my XV-144 and XV-432 disconnected for some time while working some > issues with Elecraft Support. I am now hooking everything back up again, but > when I attach the control cable from the XV to the K3 the K3 locks up and > will not respond to any control inputs, including the PWR button. When I > disconnect the control line, the K3 comes back. I have a PR6, Top Ten Band > Decoder, P3, and the XVs all sharing the ACC line. This worked fine before, > but I remember having this problem also in the past but I cannot remember > what I did to fix it. TX INH setting? Does anyone know? > > Thanks es 73, > > Eric WD6DBM ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
