Stewart, What you are asking is not possible in one macro. You could do it with two macros - one to turn it on and the other to turn it off.
73, Don W3FPR On 7/1/2012 3:00 AM, Stewart wrote: > Val, > DIGOUT1 is an open collector line that is able to be controlled by the > firmware. > It is also used to switch the external 6m pre-amp option. > > I know that some of the K3 commands (like TUNE) can be toggled by a macro. > My question was how to implement toggling by a function switch to include > commands > that do not have inherent toggling. > > I suspect (given the number of replies) that this is not possible. > > There have been a number of recent posts suggesting that the use of macros can > be used to correct some of the K3's H/W or F/W anomalies. > > Macros, although powerful, do have their limitations... > > 73 > Stewart G3RXQ > > On Sun, 1 Jul 2012 09:01:52 +0300, Val wrote: >> Stewart, >> >> You can make a toggleable macros by SWT/SWH commands that emulate >> pressing/holding the switches that normally control the given function. I >> don't know what is DIGOUT1 and how is it turned on and off normally, but >> TUNE is toggled by SWH16. >> >> 73, Val LZ1VB >> >> >>> I need some help from those experienced in K3 macros. >>> >>> What I want to do is:- >>> >>> First press of say PF1 >>> Turn ON DIGOUT1 >>> Wait n mS >>> Turn ON TUNE >>> >>> Second press of PF1 >>> Turn OFF TUNE >>> Turn OFF DIGOUT1 >>> >>> i.e. How can you toggle a macro from a function key ? >>> >>> T.I.A. >>> >>> 73 >>> Stewart G3RXQ >>> >> ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
