> I reflowed the solder on K3, l11 and l12 on the 40/20 board > and I now have 20 meters! > > So I need to look carefully at the 30/17 board now.
Good progress, Joe. At least you didn't fall into the trap of thinking that when the filter board coils had been peaked for receive that there was no need to again adjust them during transmitter alignment. That was a common error in the K1 early days, especially if the builder had used (unnecessarily IMO) Spectrogram to align the receiver...that seemed to create a reluctance to alter the coil adjustments during the transmitter alignment. The result then was always similar...no transmitter output. I love my 12-year-old K1 sn 175. I've had it on 15m for several weeks continuously, with only 15 feet of hook-up wire as an indoor antenna (receive only). It still fascinates me to hear JAs and ZLs on the K1 at mid-night local cdt. Mike / KK5F ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
