*Don, Correct...forgive me for the *brain fade*...yes the new adjustment IS for the onset of AGC as you point out. My observations still remain as stated.
Apologies to the grout for my tardiness in explaining what I am seeing/hearing. I will repeat that the muddiness I had before is now not apparent, at least to a level that it was and signals are now much easier to make out. There are some limitations with this FW but that is also being looked at by Elecraft but I will leave that for the folks at Elecraft to explain. Regards, Gary * On 7 May 2012 08:21, Don Wilhelm <[email protected]> wrote: > Gary, > > All you said is true --- BUT > > I am not trying to be argumentative, but the AGC adjustment that has had > the range increased is the "Threshold" and not the "delay" I would not > necessarily bring this up, but there *is* a menu setting for AGC DLY, and I > do not wish to see owners confused between the Threshold and the Delay. > > In simplistic terms, the "Threshold" is the RF level at which the AGC > begins to be active. > > 73, > Don W3FPR > > On 5/6/2012 5:41 PM, Gary Gregory wrote: > >> The original settings allowed setting the AGC from 2 thru 8. The new >> settings allow you to increase the delay of AGC onset from 2 through 20. >> >> >> -- Gary VK4FD - Motorhome Mobile Elecraft Equipment K3 #679, KPA-500 #018 Living the dream!!! ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
