I would guess my station is not "typical", but after several station setups in different houses, I decided to have my radio desk set out from the wall three feet so I could walk in back for dressing cables or making changes (which is continuous in my station). Its messy because of that. I bought a 4x8 sheet of peg board and have it on the back of the table for securing cables. Run a tywrap thru two adjacent holes make it easy and fast to secure wiring. Most coax is not connected to the peg board since things are still unfinished. I need more coax switches/relays to reach that state. Here's link with several photos of the station (thru the years): http://www.kl7uw.com/station%20layout.htm
73, Ed - KL7UW, WD2XSH/45 ====================================== BP40IQ 500 KHz - 10-GHz www.kl7uw.com EME: 50-1.1kw?, 144-1.4kw, 432-QRT, 1296-?, 3400-? DUBUS Magazine USA Rep [email protected] "Kits made by KL7UW" http://www.kl7uw.com/kits.htm ====================================== ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
