On 3/20/2012 5:39 AM, Pete Meier wrote: > Ok folks, > > I'll try this question again. On the P3 display there is a purple > line that move out or in when you set the SPAN width. This is NOT the > VFO A or B marker! I would like to understand what it signifies and > if there is any control over it's position other than the SPAN > setting and why. I find on some bands it up the scale, like on 20 > meters CW, with Span set at 40 it's way up at 14.186.00 when I am at > 14.010.00 But when I switch to 30 meters CW Span at 40 also its at > 10.115.45 while on 40M CW at 40 Span it's at 7.008.00 So it confounds > me what it signifies as it varies so much between bands at the same > settings.
Hmmm ... my wife tells me the Marker B line is purple, is that what you're seeing? Marker A is green, they both look the same to me. When they're turned on, they are each always set to some specific frequency [you change it with the knob], so they will move as you change the SPAN and CENTER frequencies. The MKR switch toggles them on and off [Tap and Hold]. 73, Fred K6DGW - Northern California Contest Club - CU in the 2012 Cal QSO Party 6-7 Oct 2012 - www.cqp.org ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
