Oh. I saw pin 6 labeled as 8V and thought that was the bias. (Haven't had much sleep due to doing snow removal.)
Thanks, Dick, n0ce ----- Original Message ----- From: "Don Wilhelm" <[email protected]> To: "Richard Fjeld" <[email protected]> Cc: <[email protected]>; "elecraft posting" <[email protected]> Sent: Thursday, March 01, 2012 10:16 AM Subject: Re: [Elecraft] K3; 8 volts with Mic Bias off. > Is that 8 volts you are referring to on pin 1? If it is still present > with bias turned off, then you have a K3 problem, contact support. > There is always 8 volts on pin 6. > > 73, > Don W3FPR > > On 3/1/2012 11:03 AM, Richard Fjeld wrote: >> My K3 is a year old. I was going to try a dynamic mike and tested the >> pinouts first, and notice that the 8 volts is present either with bias on >> or off. I'm using the front panel mike jack. I don't dare connect the >> dynamic mic. >> >> >> Richard Fjeld, n0ce >> ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
