Jim,
Thanks for your comments; I know of your expertise and hoped you would. >ALL microphones are analog. It is the connection to the computer that is digital. That's what I was trying to say, but apparently I didn't say it clearly enough. >For about ten years, I've used nothing but top line Thinkpads, which DO have decent sound cards. This is very useful information that I was hoping to get. Not planning to replace any computer now, but it makes sense to select better products over time. >I would suspect a problem with the connection of the mic (or the rig) to the computer sound card. I've written a couple of tutorials on that topic I am aware of a lot of issues that come into play when another active device such as a radio is connected to the computer, and I am by no means claiming that the digital modes setup I had was ideal an up to your standards. However, when a simple passive microphone capsule is connected to a simple unbalanced sound card microphone input, with no RF around, in what respect would you vary or adapt the connection? Besides impedance and level issues, are sound card inputs sensitive to DC resistance? What about DC offsets (the software offers an option to cancel such.) Could you please refer me to the specific tutorial, as there are so many that you have written. Thanks, Erik K7TV ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
