I don't EVER use fast AGC in a contest. It makes things hard to copy. I always use slow AGC set to its fastest setting, that's long enough to keep the loud bauds linearly loud, and short enough to recover when the loud station gets worked. 73, Guy.
On Wed, Dec 21, 2011 at 9:23 PM, Dave Hachadorian <[email protected]> wrote: > Here is an improved method for keeping loud pileups in the linear > gain region of the K3, improving copy. This method takes > advantage of the recently-discussed fact that K3 overall gain is > reduced when you turn AGC OFF. > > 1. Dedicate an F-Key in your logging program to turn off agc > whenever a loud pileup shows up. Turn it off on both rigs if you > are so2r. In N1MM, the macro is: > {CAT1ASC SWH027;}{CAT2ASC SWH027;} > > 2. Add to the "exchange" message a command to turn fast agc back > on (for both rigs in so2r). In N1MM, the macro is: > {CAT1ASC GT002;}{CAT2ASC GT002;} > > > The effect of the above is that agc is turned off, and gain is > reduced, only while you are struggling to pick a callsign out of > a loud pileup. As soon as you send the exchange, fast agc is > restored, and gain goes back up on both rigs. > > > Dave Hachadorian, K6LL > Yuma, AZ > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > . > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
