I've noticed the last few days that the K2 seemed to be only working on a few bands eg 10 metres for the RTTY contet recently was fine but 20 metres seemed totally "dead". Then on Sunday I found 80metres was fine for some CW but 40 metres was dead as well. Today all bands on the K2 just appear to be noise with very few signals. I tried to tune in the antenna with the KAT100 but couldn't gett any matching on any band. I suspected the antenna or co-ax cable but when I plugged in my K1 to the antenna there was no problem with the internal atu and there were loads of stations on 40, 30, 20 & 18 metres. So, its definitely the K2 which has a problem. I'm going to study the troubleshooting section of the manual now but does anyone have any ideas where i should start? 73 Ray, G3XLG
----- Ray G3XLG -- View this message in context: http://elecraft.365791.n2.nabble.com/K2-100-with-Total-Loss-of-Sensitivity-tp7085970p7085970.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
