I suggested the same thing a while back... http://www.mail-archive.com/[email protected]/msg100958.html
so it's nice to know I'm not alone! Bob NW8L >I’m new on the reflector as of today. I searched for this and didn’t see >anything that addresses my thought and I hope I’m not repeating something that >has already been covered somewhere. If so, please let me know. >To me it would be useful if the following capability were available to me: >When I move a marker with the P3 knob and then tap it to tune the K3 frequency >to my selection, I almost never hit the exact carrier frequency in SSB. I >then have to move my hand over to the K3 VFO for fine tuning. It’s not a big >deal but over and over in a contest this might become time consuming. >If, after tapping the select knob on the P3 it would be useful to me if, for a >few seconds, the knob were to become a direct K3 fine frequency tune control. >I wouldn’t have to switch back and forth between the P3 & K3 all the time. If >the knob isn’t turned for a short time, say 5-seconds, it would revert to its >normal operation of moving the marker only. >Others’ thoughts on this would be welcome. >Thanks, >Bob, W7KWS ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
