I'm sorry for the bandwidth, but upon rereading my recent message, I'm appalled at all my spelling mistakes, so here is a corrected message. 73, Andy, AE6Y
Wayne, I would add that I have found that using AGC-S with SLP=6 and THR=6 gives me the ability in CW pileups to separate out the signals by riding the RF gain control, without turning off the AVC and risking getting blown out by strong signals. I used these settings in WPX CW this past weekend and found them very effective. It's hard to figure this out on the fly, but I had tried varying the settings by listening to another station's pileup a few contests ago. The K3 is just a great run radio: unless the adjacent stations have clicks, you simply don't hear them (though the P3 shows just where they are if you want to optimize your frequency between big signals). 73, andy ae6y, p49y ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
