Gavin - I'm not familiar with MRP 40, but I question that it decodes CW via an RS232 cable. Maybe an audio cable?
SteppIR sells a "Y" cable that plugs into the PC and has 2 branches, one of which goes to the K3, and the other goes to the SteppIR controller. I have, and use it. They also have the schematic on-line if you'd like to build one. I'm able to send CW from my logging program. Chek the usage documentation on MRP 40. 73, Mike NF4L On 5/26/2011 1:00 PM, Gavin Keegan wrote: > Can anyone help or advise please ? I would like to install the MRP 40 > program on my shack computer and send and receive CW via an RS232 lead > connected to my K3, but I already use an RS232 lead connected between > the K3 and the controller for my SteppIR antenna. Can anyone advise how > I can connect both the shack computer and the SteppIR controller to the > K3 RS232 socket and use both items at the same time ? Gavin Keegan G6DGK > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
