Chris, A disk or belt sander will make short work of that job. Grip the board tightly with all your thumbs so it does not catch and be flung about the shop, maybe into a soft spot on your body - be safe. If you do not have either of those, support the board well and cut with a hacksaw. A die grinder will work too.
Be certain you are not cutting into any PC traces on the board unless you are willing to repair any that are cut off. 73, Don W3FPR On 5/24/2011 10:58 AM, Christopher Kimball wrote: > > I have a BL2 minimodule that's about 1/4" too long for my purposes. I'd > like to cut off a piece of it without zapping the functionality of the > board. > > What's the neatest way to do this with commonly available tools and 5 > thumb hands? > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
