That was my first thought, Ron. I had previously had my TUN PWR set to 25W, but when I looked at that menu item it was set to 12W. I had not changed the setting.
The KPA100 was no offline in the config menu at all. I reflashed the firmware and now it's all working, I think. The LP-100A wattmeter is showing about 75W out with a 1.6 SWR into my antenna (the K3 says I'm getting 100W out). That seems a little low to me. Next I'll try a dummy load... The investigation continues. -john On Wed, May 4, 2011 at 10:46 PM, Ron D'Eau Claire <[email protected]> wrote: > Wow! I've not had those issues turn up on my K3, but suddenly not getting > more than 12W out sounds like the KPA100 is off-line. Considering how > "confused" the K3 acted previously, I'd check the CONFIG menu to ensure it > still shows the KPA100 as "Installed". > > Ron AC7AC ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
