Hi guys. I've just hung together my new P3 and have noticed a couple of things that I can't recall as having been raised before.
On test, I noticed that the display wasn't quite square with the front panel aperture. It runs out only a millimetre or so, but it was the first thing that registered with me after its maiden power on. Do others see this? Am I being too fussy? I've had it to bits and tried every which way to square it up, but the flubber bed it sits in, and the flubber that covers the keypads is all one piece and it seems to have been glued to the PCB just a wee bit on the skew. Second, does everyone's display sit very close to the left hand side of the front panel aperture, while there's a broader, unused strip to the right side of the aperture? 73 Dave, G3TJP ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
