What logging program are you using? -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Gary Hinson Sent: Monday, April 04, 2011 12:49 PM To: [email protected] Subject: [Elecraft] K3 VFO episode
Hi guys. This morning while calling some DX - split - on 30m, it sounded as if the DX suddenly drifted about 100Hz LF. I thought at first I had knocked my VFO but no, the frequency on the display was the same. However, having accidentally QRMd the DX (oops!) I noticed that the K3 had fallen out of split. I suspect the cause was some sort of control glitch with the K3 but operator error is of course a distinct possibility, it being just after dawn and just before my first cup of tea here. Any ideas what might cause this? Has anyone else experienced it? I'm running firmware 4.25. 73 Gary ZL2iFB ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
