Hi John, There's a new field-test firmware release that includes an updated BG command. In transmit mode, BG now returns 00 - 12 (PWR) or 00 - 07 (ALC) depending on the METER selection.
A VOX set command is on my short list. 73, Wayne N6KR On Apr 4, 2011, at 6:13 AM, kcflyers wrote: > I have been using my K3 remotely for several months now. Two requests > regarding remote commands. > > (1) There is no VOX delay command. Using Vox remotely, what is good > for > normal QSO talking is too slow for DX or Contesting. Would really > like a > software command to be able to change delay. > > (2) BG command does not work on transmit. Thus no bargraph > indication on > transmit. Programmer's guide says this should indicate Power Output > or ALC. > Does neither. Needs fixing. > > These may seem to be minor software problems, but they definitely > affect the > easy of remote operation of the K3. > > John, KØIZ > > -- > View this message in context: > http://elecraft.365791.n2.nabble.com/K3-VOX-delay-BG-command-tp6238497p6238497.html > Sent from the Elecraft mailing list archive at Nabble.com. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
