Casey, "As soon as I put the faceplate in place and only tightened the screw holding the encoder in place, back to square one"
That is usually an indicator of a bad solder connection. I would suggest reflowing the solder on the front panel board and the mating connector on the RF Board. 73, Don W3FPR ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
