OK update, Now tried the P3 on a second K3 which has the IF output mod done and I'm getting the same effect, it needs a good strong signal before any trace of a signal on the P3
S9+20 signals are shown at about S6 Anything below about S6 is not visible on the P3. Any ideas before the seller has it back! Jim M0CKE -----Original Message----- From: Jim Balls Sent: Friday, January 28, 2011 4:33 AM To: [email protected] Subject: [Elecraft] P3 deaf ?? Hi all, Used the P3 for the first time last weekend during the BARTG RTTY contest. I did notice that all signal levels shown by the P3 were very low, for instance with a noise level of around s3 on the K3 and a RTTY signal in the clear at S5-6 there was no trace on the P3 on either the waterfall or scope. Signals that are peaking S9 +20 on the radio with no preamp are around –91dbm (S6) on the P3. I’ve checked cables etc and K3 had the IF output mod done. Any ideas as I see people saying you can see signals on the waterfall sometimes before you can hear them, not so the case here. Thanks Jim ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
