Thanks Alan, a Parameter Initialization seems to have sorted it out OK. By the way its on P26 of the current manual on the website. The new fixed tune mode is exactly what I was waiting for, thanks to all at Elecraft for the continuing evolution.
73 John G3XDY ----- Original Message ----- From: "Alan Bloom" <[email protected]> To: "G3XDY" <[email protected]> Cc: <[email protected]> Sent: Sunday, January 16, 2011 4:50 PM Subject: Re: [Elecraft] P3 Beta 0050 - Transverter issue > John, > > That's a strange one. The transverter gain is supposed to default to 25 > dB. If you can't adjust it with MENU:XV Gain, then you might try the > "Parameter Initialization" procedure on page 24 of the manual. > > Alan N1AL > > > On Sun, 2011-01-16 at 16:17 +0000, G3XDY wrote: >> I have downloaded the new Beta for the K3 and P3, all seems to be working >> OK >> on the HF bands, but I seem to have a problem with the P3 when using my >> 23cm >> transverter on Xvtr Band 4 (converting to 28MHz). On all the other bands >> I >> can get the usual panadaptor and waterfall displays, but on 23cm there is >> no >> spectrum display on the panadapter (for any signal level or ref level) >> but >> the waterfall turns bright red across the screen. When first powered on >> I >> can see what looks like a correct display for a second or two, then it >> disappears. The P3 transverter gain calibration setting does not appear >> to >> do anything, having selected band 4, pressing the knob again gives an >> onscreen display of "nan" and turning/pressing the select knob has no >> effect. Anyone seen similar symptoms? >> >> 73 >> >> John G3XDY >> K3 #689 >> P3 #514 > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
