Hi folks -
I am in the process of building a remote KPA100/KAT100 in an EC2
enclosure. The KAt100 is done and I am starting the amp.
I have read Lyle and Bob's excellent descriptions of the connections
between the K2 and the remote unit but in either case I believe (maybe I
missed it) the KPA100 has a separate power cord from the K2. I would
like to have one power cord with a "Y" connection to the KPA100 - and
have the KAT100 get it's power internally in the EC2 from the KPA/100. I
would like to be able to have all three modules (the K2, the KPA100, and
KAT100) turn on via the front on/off switch on the K2.
Is there any reason I should NOT do it this way or a preferred "power
on" sequence? Thanks folks.
73/Tim NZ7C
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
