The one easy thing to do Susan, is go to what should be the 10 Mhz band, then push "FREQ ENT" button (*it's the red one next to the VFO) then push 10100 then the AFX button... That will enter in that exact freq. From then out you SHOULD always end up on 30 meters when you cycle through the bands. Give it a try and tell me if you have an issue still. > Date: Sat, 9 Oct 2010 13:56:41 -0700 > From: [email protected] > To: [email protected] > Subject: [Elecraft] need help > > My k3 has developed a mind of its own....I have looked in manual but cant > find anything to help. > > when I select 10mhz band I get 12mhz....how do I get the radio to go to > 10.1mhZ when I select that band > > > If you don't change direction you WILL arrive exactly where you're headed!! > Susan Meckley, Skipper W7KFI-mm AFA9SM USSV DHARMA > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected]
This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
