Is there a way to configure the rear mic and rear speakers to work as an additional line in/out while the front mic is also active (similar to the regular line in/out).
Here's the situation: I have the line in/out rigged up to the PC for soundcard modes. However, I would also like to hook up a TNC for Amtor/Pactor ARQ modes. It wasn't very long ago that it was quite common on our MARS nets to pass traffic in both Soundcard (MT63) modes and then again in ARQ (Amtor or Pactor) for stations that needed it. Under this scenario, the operator must be able to address the net by voice and quickly change to the other modes as needed or requested, and then back to voice; there is no time for fooling around with menu options to switch mic inputs. I can see this also being necessary for any operator that needs to operate MARS digital nets using both a Pactor III modem and Winmor (soundcard tnc) modes. On my Icom 746 Pro, I have more than one AF in/out on the rear panel, so having both a TNC and soundcard hooked up and using them both within seconds of each other is trivial. Is there a way to do this with the K3? Thanks for any suggestions, Tim AE6LX ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
