Gary, Don't steal the "idea", just copy it. If asked, give proper credit.
73, Don W3FPR On 9/18/2010 10:01 PM, Gary Gregory wrote: > Hmmm, mind if I steal your idea?...:-) > > Gary > > On Sun, Sep 19, 2010 at 11:51 AM, Bob Cunnings<[email protected]>wrote: > >> I use the P3 with a fairly wide span to spot and pounce on signals in >> the CW bands. The P3 is near the edge of the table and I find myself >> most comfortable when placing the heel of my hand on the table edge >> and twirling the QSY knob with the index and middle fingers to move >> the cursor around the band. This was hard to do with the stock knob, >> it seemed a bit small and I needed a little more friction also. While >> rummaging around in a drawer I found a couple of those dipped vinyl >> protective caps used made to fit SO-239 connectors was inspired. One >> of these fits snugly over the P3 QSY knob. It fattens the knob >> considerably and offers a lot more friction. I can twirl away >> effortlessly now, and tapping is easy too. Here's a photo link: >> >> http://www.whitemesa.com/nw8l/images/p3-knob.jpg > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
