I'll confess I probably am not fully understanding your issue. Nevertheless, when you use "Pitch" to set the tone to 2125 take a look at "Shift" on the IF/DSP control and see if it reads "*2.21". This should be the default value. When it is so, then you can change "Width" to limit the garbage you receive around your desired signal. I assume you have "Net" and "AFC" turned off in your RTTY program.
Personally, I like the 915 pitch, since I like to listen to signals as well as watching them on the RTTY screen and/or panadapter and the lower tone is much easier on my ears. So I set up MMTTY for 915/170. Wes N7WS --- On Fri, 9/3/10, Tommy Alderman <[email protected]> wrote: > Yesterday I posted that in FSK D I > had low to no audio from my new K3. One > would immediately suspect I had not RTFM, but in this case > I have read it > and am in the process of re-reading it. > > While the low RTTY audio problem is solved, there is > nowhere in the manual, > that I can find, that tells a new user that in the DATA > mode, evidentially > the PITCH function changes. The description about PITCH at > the bottom of > page 31, second column ambiguously alludes to this > function. Since my RX BW > is still set for a flat response, I am not really sure why > setting the PITCH > to 915 -170 is what is required to bring the RTTY audio > level back up to > normal. And I have no idea what my software has to do with > the issue. The > 'normal' RTTY MARK frequency is 2125, so I'm still trying > to understand why > I have to set PITCH to 915 in order to be able to hear it. > > Perhaps in a later revision of the K3 manual, this area > could be explained > or explained more clearly. > > Thanks tons to the three gents who tried to help me. > > 73, > > Tom - W4BQF > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
