Hi All, The new EC 500 amp coming out will require the KPA-100 PA for K2 users.
I am interested in adding an amp that can run from the K2 without the KPA-100. I don't care about QSK, I can switch the amp ON and OFF XMIT manually or I can build an interface that will switch the amp from the K2 AUX line. However, I will be locating the amp in a remote room (not located at in the shack room) so I will want an amp that I can perhaps build a wired control for band selections. It would be better if it does not have a built in tuner. But since it will be remote, I will need a unit that will not require direct controling of band switching, tuning etc. Also, it must be able to output at least 200 watts CW all bands. Your suggestions very welcome. Thanks Duane -- [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
