Lloyd, Her is one way to adapt screw terminals to banana jacks securely to the BL1. Mount UNinsulated an banana jack (Mouser 565-3267) in a small, short strip of metal (aluminum, thick copper, or even a cut-off piece of one of those metal plates on a junk computer card). Of course, you will need 2 jacks and 2 strips of the metal - drill each strip of metal with 2 holes, one large enough to insert the banana jack at one end and the other large enough to clear the screw threads on the Balun terminals. How secure it will hold the jacks depends on the stiffness and lenght of your metal strips.
73, Don W3FPR > -----Original Message----- > > Yes, BUT...the deal here is that the balun has only > these funky li'l screw terminals on the feedline end. > I wish there was an RF connector there, but there > isn't. In the light of that, how would you attach > banana plugs to the screw terminals securely? > > LL > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
