Thanks to all who answered my last KX1 question. I have the base unit completed and was going through final alignment and tests and have a problem. General symptoms are low power output (1.5 W) and very rough tone on 40M, slightly better tone but low power also on 20M. I have opened a support case with Elecraft and they have been working with me, but thought I would enlist wisdom of the list.
I have done all testing on a 12V gelcell putting out about 12.5V RX is great. Nice tone, good sensitivity. I went through the troubleshooting in the manual. Have this data and questions: 86: Some of the voltages on Q4 and Q5 look a little off Q4 E: .3 B: 1.0 C: 3.3 Q5 E: 2.2 B: 3.3 C: 12.24 I checked the values on all the components in the driver. Any ideas would be appreciated.. 72 de Tim KD7JZ -- Tim Hodges <[EMAIL PROTECTED]> _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
