On Fri, 2004-08-20 at 10:38 -0700, Jack Brindle wrote: > On Apr 14, 2004, at 10:19 AM, "Brendan Minish" <[EMAIL PROTECTED]>
> > want short presses of the F1 to f4 buttons to trigger the K2's memory > > keyer playback. > > > Yes. You don't even need to reconfigure the box to do it. Simply > install jumper W8 to disable key presses. This is described on page 20 > of the KRC2 manual. > A second way is to install the Accessibility upgrade which has all > sorts of functions, but no sending of CW message from the K2 memories. > > -Jack Brindle, WA4FIB Jack, the problem with that method is that it disables ALL key presses. I want to be able to select alternative antennas by using the F1 and F2 Buttons. (& being able to use short presses for this would be nice too but that will have to wait for the KRC2 Utility ) In the mean time I was told how to clear the K2 keyer memories. enter programming mode for the memory you want to clear. send one dit and press the mem button before the counter increments down from 250 to 249. You have to be quick. The KRC2 utility is badly needed, I can think of lots of things I could get it to do.. If only I could configure it :-( Is anyone writing a utility for the KRC2 ? If so I can offer my services to help test it under windows or linux. Is there any information on how to program the KRC2 available any place ? 73 Brendan EI6IZ -- Brendan EI6IZ <[EMAIL PROTECTED]> _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
