[email protected] wrote: > I am making some progress on being able to access my account. > > > I have only set up H.323. Is there a test number for the video and sound?
I am not aware of, see http://wiki.ekiga.org/index.php/Fun_Numbers. But some people complain that h323 does not work through gui, but from command line only, see https://bugzilla.gnome.org/show_bug.cgi?id=592363 for ex. > > > When I load the Ekiga software it reports: > > Ekiga did not manage to configure your network settings automatically. You > can > still use it, but you need to configure your network settings manually. > > However if I ignore the error message it says I am logged in and online. > Trying > 501 locks the program and I have to abort it. It does connect but there is no > button to terminate the call and I can not hear anything when I speak on the > call. I suspect this is to do with not setting up the sip ports. > > What should I do next? > > Robin > > Please see http://wiki.ekiga.org/index.php/Enable_port_forwarding_manually > for > instructions > > > I am using a Thompson Speedtouch 716 router. > > The auto eth0 connection details are: > > IPv4 Setting: Auto (DHCP) > I can see a specified IP Address using protocol IPv4, as shown in the Active > Network connections within Ubuntu, but I do not know if is a static IP > address. > > Network device: eth0 > Hardware address: 00:1d:7d:0a:01:3e > Multicast: Enabled > MTU: 1500 > Link speed: not available > State: Active > Transmitted packets: 33302 > Transmission errors: 0 > Received packets: 40246 > Reception errors: 0 > Collisions: 0 > > At the router I can see an Ip address under RoutedEthoA > Under system config it says under the service configuration that the service > name is Static IP 3 Data Ports (modified by user) > > In the game or application definition section of the router I can not see any > trigger protocols or trigger ports against the translated ports for the > various > portocols tcp/udp/tcp as previously quoted. > > Robin > > > > > > > The above comments are in response to John Feagans's email of 03/01/10 15:53 > as > quoted below: >> Robin, Could you clarify which router you are using and did you set up >> static >> IP in the PC and the router for the ports to forward to? >> >> >> Message: 3 >> >> Subject: [Ekiga-list] Port forwarding >> Content-Type: text/plain; charset="us-ascii" >> >> An HTML attachment was scrubbed... >> URL: >> <http://mail.gnome.org/archives/ekiga-list/attachments/20100102/77feacbf/attachment.html> >> >> ------------------------------ >> >> _______________________________________________ >> ekiga-list mailing list >> [email protected] <mailto:[email protected]> >> http://mail.gnome.org/mailman/listinfo/ekiga-list >> >> End of ekiga-list Digest, Vol 42, Issue 2 >> ***************************************** >> >> -------------------------------------------------------------------------------- _______________________________________________ ekiga-list mailing list [email protected] http://mail.gnome.org/mailman/listinfo/ekiga-list
