Actually there are some Tandberg endpoints in my LAN. Tandberg MXP 1700 - H323 and IP supported Tandberg E20 - SIP only
In my network there is no NAT, actually some equipments are in the same subnet, i.e. no routing involved. With Ekiga 2.x, SIP connection with both Tandberg endpoints are ok, but the video codec supported is only H.261. With Ekiga 3.x, neither H323 nor SIP call was gone through. In my Tandberg box, no SIP service IP is configured. I was able to make a SIP from Ekiga 2.x to Tandberg. When the call is set up. Tandberg showed the caller SIP address is [email protected], where abc is my computer hostname and w.x.y.z is caller's IP. But call made from Tandberg to ekiga failed. Interesting...... I did the test particularly on SIP. For H.323 I can use Netmeeting, which is pretty stable. And all I have to find out whether two SIP clients can talk with each other without registering to SIP server. Otherwise I need a separate SIP server module running in my LAN. _______________________________________________ ekiga-list mailing list [email protected] http://mail.gnome.org/mailman/listinfo/ekiga-list
