Hi, Le mardi 12 février 2008 à 22:47 -0700, David Mohr a écrit : > Hi everyone, > I'm having trouble getting ekiga to work. It used to work just fine > for me when I used it a couple of months ago. But then my soundcard > burnt out and I had to resort to using my crappy onboard soundcard, > and now I can't get ekiga to send any sound anymore. > > Since I am using an ac97 codec sound card, I don't have hardware > mixing, and need to use an .asoundrc to get software mixing. Yet once > I had trouble with ekiga I removed the .asoundrc, and still it did not > send any audio. So I'm trying to get anything working at all before I > attempt to mess with my asoundrc. > > I'm behind a NAT firewall, but stun is enabled. I did my tests with > [EMAIL PROTECTED] . Without the asoundrc, the druid can record and > playback just fine. When I make the call, it says it connects fine, > but then in the status line I see A: 0.00 / 0.00, so no audio is being > sent or received. My guess receiving nothing is Ok, because there is > nothing being sent to echo. Also the hangup sound is played just fine. > > Can anyone help me shed some light into this? It's pretty important to > me to get this to work, but I'm lost at the moment :-(. > > Attached is a -d 4. >
You disabled common codecs with the echo test. Try enabling PCMU and PCMA and it should work. Ekiga accepts the connection because you have at least one codec : H.261 for video. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:[EMAIL PROTECTED] _______________________________________________ ekiga-list mailing list [email protected] http://mail.gnome.org/mailman/listinfo/ekiga-list
