Hello, Le lundi 01 octobre 2007 à 15:14 +0530, Pratiksha Powar a écrit : > Hi Damein, > > Does Ekiga 2.0.9 or above use Codec-96 for DTMF encoding?
96 is the payload type. The Payload type is dynamic for RFC2833. > Please provide this information as early as possible. > > Thanks, > Pratiksha > > On Fri, 2007-09-21 at 16:00 +0200, Damien Sandras wrote: > > Le vendredi 21 septembre 2007 à 14:33 +0530, Pratiksha Powar a écrit : > > > Hi Everybody, > > > > > > I'm using Ekiga for a corporate project. > > > Using Ekiga I connect to a local server in my company which > > > runs voice applications. I want to use Ekiga to test these > > > applications. > > > > > > I use sip addresses like [EMAIL PROTECTED] etc. > > > The server is unable to understand the DTMF PayLoad because the codec > > > used by Ekiga is 101 and the one supported is 96. > > > > > > I receive the following error when i run : > > > > > > ekiga -d 2 -c [EMAIL PROTECTED] > > > > > > 2007/09/21 14:28:12.849 0:11.431 SIP Transport:a2de7c8 SDP > > > Media attribute rtpmap found for unknown RTP type [pt=96] > > > > > > Following is the server's log: > > > INVITE sip:[EMAIL PROTECTED] SIP/2.0 > > > Date: Thu, 20 Sep 2007 10:33:47 GMT > > > CSeq: 1 INVITE > > > Via: SIP/2.0/UDP > > > 172.16.18.92:5063;branch=z9hG4bK34ff8fa3-d265-dc11-996c-0019b97d3b5d;rport > > > User-Agent: Ekiga/2.0.2 > > > From: "Pratiksha Powar" > > > <sip:[EMAIL PROTECTED]>;tag=2c218fa3-d265-dc11-996c-0019b97d3b5d > > > Call-ID: [EMAIL PROTECTED] > > > To: <sip:[EMAIL PROTECTED]> > > > Contact: <sip:[EMAIL PROTECTED]:5063;transport=udp> > > > Allow: INVITE,ACK,OPTIONS,BYE,CANCEL,NOTIFY,REFER,MESSAGE > > > Content-Type: application/sdp > > > Content-Length: 368 > > > Max-Forwards: 70 > > > > > > v=0 > > > o=- 1190284427 1190284427 IN IP4 172.16.18.92 > > > s=Opal SIP Session > > > c=IN IP4 172.16.18.92 > > > t=0 0 > > > m=audio 5004 RTP/AVP 101 114 115 3 107 110 0 8 > > > a=rtpmap:101 telephone-event/8000 > > > a=fmtp:101 0-15 > > > a=rtpmap:114 SPEEX/16000 > > > a=rtpmap:115 iLBC/8000 > > > a=rtpmap:3 GSM/8000 > > > a=rtpmap:107 MS-GSM/8000 > > > a=rtpmap:110 SPEEX/8000 > > > a=rtpmap:0 PCMU/8000 > > > a=rtpmap:8 PCMA/8000 > > > > > > I don't know much about codecs. > > > Is there a version of Ekiga which can help me solve this problem? > > > Currently I'm using Ekiga 2.0.2 on Gnome 2.16. > > > Ekiga was a part of the CentOS 5.0 distribution. > > > > > > > You should upgrade to at least Ekiga 2.0.9 and upload a full -d 4 output > > somewhere. We will check it out. > > > ============================== > DISCLAIMER: The information in this message is confidential and may be > legally privileged. It is intended solely for the addressee. Access to this > message by anyone else is unauthorized. If you are not the intended > recipient, any disclosure, copying, or distribution of the message, or any > action or omission taken by you in reliance on it, is prohibited and may be > unlawful. Please immediately contact the sender if you have received this > message in error. Further, this e-mail may contain viruses and all reasonable > precaution to minimize the risk arising there from is taken by OnMobile. > OnMobile is not liable for any damage sustained by you as a result of any > virus in this e-mail. All applicable virus checks should be carried out by > you before opening this e-mail or any attachment thereto. > Thank you - OnMobile Global Limited. > ============================== -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:[EMAIL PROTECTED] _______________________________________________ ekiga-list mailing list [email protected] http://mail.gnome.org/mailman/listinfo/ekiga-list
