On 05/08/2014 01:59 PM, Ben Greear wrote:
> On 05/08/2014 01:44 PM, Fujinaka, Todd wrote:
>> Oh, and what's the conditions of the test? What's the traffic, what's the 
>> link partner, and what do the stats registers say on both ends?
> 
> The ports are connected to a netgear 1Gbps un-managed 8-port switch.
> 
> The test involves sending/receiving a fair amount of UDP and TCP, typically 
> no more than
> about 340Mbps at highest speed.  I don't have good details on the exact 
> traffic load
> when the problems hit as it was during overnight automated regression tests...
> 
> It is not so easily reproduced, but I'll get ethtool stats next time
> it happens and send that to you.

Here's some ethtool stats.  We got these within a minute of seeing the
splat.

We were exercising an ath10k NIC in this system when the problem happened.

[root@ct521-1n-1ac-f19 ~]#
[root@ct521-1n-1ac-f19 ~]#
[root@ct521-1n-1ac-f19 ~]# e1000e 0000:02:00.0 eth1: Detected Hardware Unit 
Hang:
  TDH                  <e0>
  TDT                  <f7>
  next_to_use          <f7>
  next_to_clean        <db>
buffer_info[next_to_clean]:
  time_stamp           <0>
  next_to_watch        <b4>
  jiffies              <100043252>
  next_to_watch.status <0>
MAC Status             <80080783>
PHY Status             <796d>
PHY 1000BASE-T Status  <3c00>
PHY Extended Status    <3000>
PCI Status             <18>
e1000e 0000:02:00.0 eth1: Reset adapter unexpectedly

[root@ct521-1n-1ac-f19 ~]# ethtool -S eth1
NIC statistics:
     rx_packets: 23716
     tx_packets: 16364345
     rx_bytes: 14068070
     tx_bytes: 24840883006
     rx_broadcast: 33
     tx_broadcast: 12
     rx_multicast: 0
     tx_multicast: 10
     rx_errors: 0
     tx_errors: 0
     tx_dropped: 0
     multicast: 0
     collisions: 0
     rx_length_errors: 0
     rx_over_errors: 0
     rx_crc_errors: 0
     rx_frame_errors: 0
     rx_no_buffer_count: 0
     rx_missed_errors: 0
     tx_aborted_errors: 0
     tx_carrier_errors: 0
     tx_fifo_errors: 0
     tx_heartbeat_errors: 0
     tx_window_errors: 0
     tx_abort_late_coll: 0
     tx_deferred_ok: 0
     tx_single_coll_ok: 0
     tx_multi_coll_ok: 0
     tx_timeout_count: 1
     tx_restart_queue: 1
     rx_long_length_errors: 0
     rx_short_length_errors: 0
     rx_align_errors: 0
     tx_tcp_seg_good: 0
     tx_tcp_seg_failed: 0
     rx_flow_control_xon: 67613
     rx_flow_control_xoff: 68641
     tx_flow_control_xon: 0
     tx_flow_control_xoff: 0
     rx_csum_offload_good: 22
     rx_csum_offload_errors: 0
     rx_header_split: 0
     alloc_rx_buff_failed: 0
     tx_smbus: 0
     rx_smbus: 0
     dropped_smbus: 0
     rx_dma_failed: 0
     tx_dma_failed: 0
     rx_hwtstamp_cleared: 0
     uncorr_ecc_errors: 0
     corr_ecc_errors: 0

Thanks,
Ben

-- 
Ben Greear <[email protected]>
Candela Technologies Inc  http://www.candelatech.com


------------------------------------------------------------------------------
"Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE
Instantly run your Selenium tests across 300+ browser/OS combos.
Get unparalleled scalability from the best Selenium testing platform available
Simple to use. Nothing to install. Get started now for free."
http://p.sf.net/sfu/SauceLabs
_______________________________________________
E1000-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/e1000-devel
To learn more about Intel&#174; Ethernet, visit 
http://communities.intel.com/community/wired

Reply via email to