"Number of VFs" is 0 for both ports on my device.
*Original State:*
[root@sec47 ~]# /usr/src/ethregs-1.16.0/ethregs -s 0000:04:00.1 | grep DCA
DCA_RXCTRL[000] 00001200
DCA_RXCTRL[001] 1f0002a0
DCA_RXCTRL[002] 1f0002a0
DCA_RXCTRL[003] 1f0002a0
DCA_RXCTRL[004] 1f0002a0
DCA_RXCTRL[005] 1f0002a0
DCA_RXCTRL[006] 1f0002a0
DCA_RXCTRL[007] 1f0002a0
DCA_RXCTRL[008] 1e0002a0
DCA_RXCTRL[009] 1e0002a0
DCA_RXCTRL[010] 1e0002a0
DCA_RXCTRL[011] 1e0002a0
DCA_RXCTRL[012] 1e0002a0
DCA_RXCTRL[013] 1e0002a0
DCA_RXCTRL[014] 1e0002a0
DCA_RXCTRL[015] 1e0002a0
*After setting link down:*
[root@sec47 ~]# ip link set eth3 down
[root@sec47 ~]# /usr/src/ethregs-1.16.0/ethregs -s 0000:04:00.1 | grep DCA
DCA_RXCTRL[000] 1e0002a0
DCA_RXCTRL[001] 1e0002a0
DCA_RXCTRL[002] 1e0002a0
DCA_RXCTRL[003] 1e0002a0
DCA_RXCTRL[004] 1e0002a0
DCA_RXCTRL[005] 1e0002a0
DCA_RXCTRL[006] 1e0002a0
DCA_RXCTRL[007] 1e0002a0
DCA_RXCTRL[008] 1e0002a0
DCA_RXCTRL[009] 1e0002a0
DCA_RXCTRL[010] 1e0002a0
DCA_RXCTRL[011] 1e0002a0
DCA_RXCTRL[012] 1e0002a0
DCA_RXCTRL[013] 1e0002a0
DCA_RXCTRL[014] 1e0002a0
DCA_RXCTRL[015] 1e0002a0
*After setting link up:*
[root@sec47 ~]# ip link set eth3 up
[root@sec47 ~]# /usr/src/ethregs-1.16.0/ethregs -s 0000:04:00.1 | grep DCA
DCA_RXCTRL[000] 1f0002a0
DCA_RXCTRL[001] 1f0002a0
DCA_RXCTRL[002] 1f0002a0
DCA_RXCTRL[003] 1f0002a0
DCA_RXCTRL[004] 1f0002a0
DCA_RXCTRL[005] 1f0002a0
DCA_RXCTRL[006] 1f0002a0
DCA_RXCTRL[007] 1f0002a0
DCA_RXCTRL[008] 1e0002a0
DCA_RXCTRL[009] 1e0002a0
DCA_RXCTRL[010] 1e0002a0
DCA_RXCTRL[011] 1e0002a0
DCA_RXCTRL[012] 1e0002a0
DCA_RXCTRL[013] 1e0002a0
DCA_RXCTRL[014] 1e0002a0
DCA_RXCTRL[015] 1e0002a0
Output from modified driver:
Intel(R) 10 Gigabit PCI Express Network Driver - version 3.19.1
Copyright (c) 1999-2013 Intel Corporation.
ixgbe 0000:04:00.0: irq 122 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 123 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 124 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 125 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 126 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 127 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 128 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 129 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 130 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 131 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 132 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 133 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 134 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 135 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 136 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 137 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 138 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 139 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 140 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 141 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 142 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 143 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 144 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 145 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 146 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 147 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 148 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 149 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 150 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 151 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 152 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 153 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 154 for MSI/MSI-X
Updating q_vector 0
Updating DCA for Tx queue 0
Updating DCA for Rx queue 0
Updating q_vector 1
Updating DCA for Tx queue 1
Updating DCA for Rx queue 1
Updating q_vector 2
Updating DCA for Tx queue 2
Updating DCA for Rx queue 2
Updating q_vector 3
Updating DCA for Tx queue 3
Updating DCA for Rx queue 3
Updating q_vector 4
Updating DCA for Tx queue 4
Updating DCA for Rx queue 4
Updating q_vector 5
Updating DCA for Tx queue 5
Updating DCA for Rx queue 5
Updating q_vector 6
Updating DCA for Tx queue 6
Updating DCA for Rx queue 6
Updating q_vector 7
Updating DCA for Tx queue 7
Updating DCA for Rx queue 7
Updating q_vector 8
Updating DCA for Tx queue 8
Updating DCA for Rx queue 8
Updating q_vector 9
Updating DCA for Tx queue 9
Updating DCA for Rx queue 9
Updating q_vector 10
Updating DCA for Tx queue 10
Updating DCA for Rx queue 10
Updating q_vector 11
Updating DCA for Tx queue 11
Updating DCA for Rx queue 11
Updating q_vector 12
Updating DCA for Tx queue 12
Updating DCA for Rx queue 12
Updating q_vector 13
Updating DCA for Tx queue 13
Updating DCA for Rx queue 13
Updating q_vector 14
Updating DCA for Tx queue 14
Updating DCA for Rx queue 14
Updating q_vector 15
Updating DCA for Tx queue 15
Updating DCA for Rx queue 15
Updating q_vector 16
Updating DCA for Tx queue 16
Updating DCA for Rx queue 16
Updating q_vector 17
Updating DCA for Tx queue 17
Updating DCA for Rx queue 17
Updating q_vector 18
Updating DCA for Tx queue 18
Updating DCA for Rx queue 18
Updating q_vector 19
Updating DCA for Tx queue 19
Updating DCA for Rx queue 19
Updating q_vector 20
Updating DCA for Tx queue 20
Updating DCA for Rx queue 20
Updating q_vector 21
Updating DCA for Tx queue 21
Updating DCA for Rx queue 21
Updating q_vector 22
Updating DCA for Tx queue 22
Updating DCA for Rx queue 22
Updating q_vector 23
Updating DCA for Tx queue 23
Updating DCA for Rx queue 23
Updating q_vector 24
Updating DCA for Tx queue 24
Updating DCA for Rx queue 24
Updating q_vector 25
Updating DCA for Tx queue 25
Updating DCA for Rx queue 25
Updating q_vector 26
Updating DCA for Tx queue 26
Updating DCA for Rx queue 26
Updating q_vector 27
Updating DCA for Tx queue 27
Updating DCA for Rx queue 27
Updating q_vector 28
Updating DCA for Tx queue 28
Updating DCA for Rx queue 28
Updating q_vector 29
Updating DCA for Tx queue 29
Updating DCA for Rx queue 29
Updating q_vector 30
Updating DCA for Tx queue 30
Updating DCA for Rx queue 30
Updating q_vector 31
Updating DCA for Tx queue 31
Updating DCA for Rx queue 31
ixgbe 0000:04:00.0: PCI Express bandwidth of 32GT/s available
ixgbe 0000:04:00.0: (Speed:5.0GT/s, Width: x8, Encoding Loss:20%)
ixgbe 0000:04:00.0: eth2: MAC: 2, PHY: 9, SFP+: 3, PBA No: E68793-002
ixgbe 0000:04:00.0: 00:1b:21:5a:68:34
ixgbe 0000:04:00.0: eth2: Enabled Features: RxQ: 32 TxQ: 32 FdirHash DCA
RSC
ixgbe 0000:04:00.0: eth2: Intel(R) 10 Gigabit Network Connection
ixgbe 0000:04:00.1: irq 155 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 156 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 157 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 158 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 159 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 160 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 161 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 162 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 163 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 164 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 165 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 166 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 167 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 168 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 169 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 170 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 171 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 172 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 173 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 174 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 175 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 176 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 177 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 178 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 179 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 180 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 181 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 182 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 183 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 184 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 185 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 186 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 187 for MSI/MSI-X
Updating q_vector 0
Updating DCA for Tx queue 0
Updating DCA for Rx queue 0
Updating q_vector 1
Updating DCA for Tx queue 1
Updating DCA for Rx queue 1
Updating q_vector 2
Updating DCA for Tx queue 2
Updating DCA for Rx queue 2
Updating q_vector 3
Updating DCA for Tx queue 3
Updating DCA for Rx queue 3
Updating q_vector 4
Updating DCA for Tx queue 4
Updating DCA for Rx queue 4
Updating q_vector 5
Updating DCA for Tx queue 5
Updating DCA for Rx queue 5
Updating q_vector 6
Updating DCA for Tx queue 6
Updating DCA for Rx queue 6
Updating q_vector 7
Updating DCA for Tx queue 7
Updating DCA for Rx queue 7
Updating q_vector 8
Updating DCA for Tx queue 8
Updating DCA for Rx queue 8
Updating q_vector 9
Updating DCA for Tx queue 9
Updating DCA for Rx queue 9
Updating q_vector 10
Updating DCA for Tx queue 10
Updating DCA for Rx queue 10
Updating q_vector 11
Updating DCA for Tx queue 11
Updating DCA for Rx queue 11
Updating q_vector 12
Updating DCA for Tx queue 12
Updating DCA for Rx queue 12
Updating q_vector 13
Updating DCA for Tx queue 13
Updating DCA for Rx queue 13
Updating q_vector 14
Updating DCA for Tx queue 14
Updating DCA for Rx queue 14
Updating q_vector 15
Updating DCA for Tx queue 15
Updating DCA for Rx queue 15
Updating q_vector 16
Updating DCA for Tx queue 16
Updating DCA for Rx queue 16
Updating q_vector 17
Updating DCA for Tx queue 17
Updating DCA for Rx queue 17
Updating q_vector 18
Updating DCA for Tx queue 18
Updating DCA for Rx queue 18
Updating q_vector 19
Updating DCA for Tx queue 19
Updating DCA for Rx queue 19
Updating q_vector 20
Updating DCA for Tx queue 20
Updating DCA for Rx queue 20
Updating q_vector 21
Updating DCA for Tx queue 21
Updating DCA for Rx queue 21
Updating q_vector 22
Updating DCA for Tx queue 22
Updating DCA for Rx queue 22
Updating q_vector 23
Updating DCA for Tx queue 23
Updating DCA for Rx queue 23
Updating q_vector 24
Updating DCA for Tx queue 24
Updating DCA for Rx queue 24
Updating q_vector 25
Updating DCA for Tx queue 25
Updating DCA for Rx queue 25
Updating q_vector 26
Updating DCA for Tx queue 26
Updating DCA for Rx queue 26
Updating q_vector 27
Updating DCA for Tx queue 27
Updating DCA for Rx queue 27
Updating q_vector 28
Updating DCA for Tx queue 28
Updating DCA for Rx queue 28
Updating q_vector 29
Updating DCA for Tx queue 29
Updating DCA for Rx queue 29
Updating q_vector 30
Updating DCA for Tx queue 30
Updating DCA for Rx queue 30
Updating q_vector 31
Updating DCA for Tx queue 31
Updating DCA for Rx queue 31
ixgbe 0000:04:00.1: PCI Express bandwidth of 32GT/s available
ixgbe 0000:04:00.1: (Speed:5.0GT/s, Width: x8, Encoding Loss:20%)
ixgbe 0000:04:00.1: eth3: MAC: 2, PHY: 9, SFP+: 4, PBA No: E68793-002
ixgbe 0000:04:00.1: 00:1b:21:5a:68:35
ixgbe 0000:04:00.1: eth3: Enabled Features: RxQ: 32 TxQ: 32 FdirHash DCA
RSC
ixgbe 0000:04:00.1: eth3: Intel(R) 10 Gigabit Network Connection
ixgbe 0000:04:00.0: eth2: changing MTU from 1500 to 9000
8021q: adding VLAN 0 to HW filter on device eth2
ixgbe 0000:04:00.0: eth2: detected SFP+: 3
Updating DCA for Tx queue 7
Updating DCA for Tx queue 8
Updating DCA for Tx queue 9
Updating DCA for Tx queue 5
Updating DCA for Tx queue 4
Updating DCA for Tx queue 6
Updating DCA for Tx queue 2
Updating DCA for Tx queue 3
Updating DCA for Tx queue 1
Updating DCA for Rx queue 8
Updating DCA for Rx queue 9
Updating DCA for Rx queue 5
Updating DCA for Rx queue 4
Updating DCA for Rx queue 6
Updating DCA for Rx queue 2
Updating DCA for Rx queue 3
Updating DCA for Rx queue 1
Updating DCA for Rx queue 7
ixgbe 0000:04:00.1: eth3: changing MTU from 1500 to 9000
Updating DCA for Tx queue 18
Updating DCA for Tx queue 28
Updating DCA for Tx queue 25
Updating DCA for Tx queue 19
Updating DCA for Tx queue 11
Updating DCA for Tx queue 27
Updating DCA for Tx queue 30
Updating DCA for Rx queue 28
Updating DCA for Tx queue 29
Updating DCA for Tx queue 16
Updating DCA for Rx queue 25
Updating DCA for Tx queue 23
Updating DCA for Tx queue 12
Updating DCA for Tx queue 22
Updating DCA for Tx queue 21
Updating DCA for Tx queue 17
Updating DCA for Tx queue 31
Updating DCA for Tx queue 10
Updating DCA for Tx queue 20
Updating DCA for Tx queue 24
Updating DCA for Tx queue 14
Updating DCA for Tx queue 13
Updating DCA for Rx queue 19
Updating DCA for Tx queue 15
Updating DCA for Tx queue 26
Updating DCA for Rx queue 11
Updating DCA for Rx queue 27
Updating DCA for Rx queue 30
Updating DCA for Rx queue 29
Updating DCA for Rx queue 16
Updating DCA for Rx queue 23
Updating DCA for Rx queue 12
Updating DCA for Rx queue 22
Updating DCA for Rx queue 21
Updating DCA for Rx queue 17
Updating DCA for Rx queue 31
Updating DCA for Rx queue 10
Updating DCA for Rx queue 20
Updating DCA for Rx queue 24
Updating DCA for Rx queue 14
Updating DCA for Rx queue 13
Updating DCA for Rx queue 15
Updating DCA for Rx queue 26
Updating DCA for Rx queue 18
8021q: adding VLAN 0 to HW filter on device eth3
ixgbe 0000:04:00.1: eth3: detected SFP+: 4
Updating DCA for Tx queue 5
Updating DCA for Tx queue 4
Updating DCA for Tx queue 6
Updating DCA for Tx queue 3
Updating DCA for Tx queue 2
Updating DCA for Tx queue 1
Updating DCA for Rx queue 4
Updating DCA for Rx queue 6
Updating DCA for Rx queue 3
Updating DCA for Rx queue 2
Updating DCA for Rx queue 1
Updating DCA for Rx queue 5
Updating DCA for Tx queue 28
Updating DCA for Tx queue 29
Updating DCA for Tx queue 26
Updating DCA for Tx queue 27
Updating DCA for Tx queue 24
Updating DCA for Tx queue 22
Updating DCA for Tx queue 25
Updating DCA for Tx queue 21
Updating DCA for Tx queue 23
Updating DCA for Tx queue 20
Updating DCA for Tx queue 19
Updating DCA for Tx queue 17
Updating DCA for Tx queue 14
Updating DCA for Tx queue 15
Updating DCA for Tx queue 18
Updating DCA for Tx queue 13
Updating DCA for Tx queue 10
Updating DCA for Tx queue 11
Updating DCA for Tx queue 7
Updating DCA for Tx queue 8
Updating DCA for Tx queue 16
Updating DCA for Tx queue 12
Updating DCA for Rx queue 29
Updating DCA for Tx queue 9
Updating DCA for Rx queue 26
Updating DCA for Rx queue 27
Updating DCA for Rx queue 24
Updating DCA for Rx queue 22
Updating DCA for Rx queue 25
Updating DCA for Rx queue 21
Updating DCA for Rx queue 23
Updating DCA for Rx queue 20
Updating DCA for Rx queue 19
Updating DCA for Rx queue 17
Updating DCA for Rx queue 14
Updating DCA for Rx queue 15
Updating DCA for Rx queue 18
Updating DCA for Rx queue 13
Updating DCA for Rx queue 10
Updating DCA for Rx queue 11
Updating DCA for Rx queue 7
Updating DCA for Rx queue 8
Updating DCA for Rx queue 16
Updating DCA for Rx queue 12
Updating DCA for Rx queue 9
Updating DCA for Rx queue 28
Updating DCA for Tx queue 31
Updating DCA for Tx queue 30
Updating DCA for Rx queue 30
Updating DCA for Rx queue 31
ixgbe 0000:04:00.0: eth2: NIC Link is Up 10 Gbps, Flow Control: None
ixgbe 0000:04:00.1: eth3: NIC Link is Up 10 Gbps, Flow Control: None
Thanks,
Scott Silverman | IT | Simplex Investments | 312-360-2444
230 S. LaSalle St., Suite 4-100, Chicago, IL 60604
On Mon, Feb 24, 2014 at 10:55 AM, Alexander Duyck <
[email protected]> wrote:
> SR-IOV is something you would have to explicitly enable either by
> configuring it via module parameter or via a sysfs value. You can
> verify if it is enabled or not by running lspci -vvv -s <b:d.f> where
> b:d.f is the bus, device, and function number for your device. If
> SR-IOV is enabled the Number of VFs value will be non-zero.
>
> One other thing you might try would be to bring the interface down by
> running "ip link set <ethX> down", then run the ethregs again to capture
> the state of the DCA registers, followed by "ip link set <ethX up>.
>
> It would also be useful if you could try making the changes below to
> your driver to provide some debug output in the dmesg log. The piece I
> am trying to capture here is if we try to update Tx and Rx queue 0
> configuration or not. Just loading the driver with these changes in
> should be enough to give us that information.
>
> Thanks,
>
> Alex
>
> --
>
> diff --git a/src/ixgbe_main.c b/src/ixgbe_main.c
> index 418ff08..56d70b5 100644
> --- a/src/CORE/ixgbe_main.c
> +++ b/src/CORE/ixgbe_main.c
> @@ -901,6 +901,8 @@ static void ixgbe_update_tx_dca(struct ixgbe_adapter
> *adapter,
> u32 txctrl = dca3_get_tag(tx_ring->dev, cpu);
> u16 reg_offset;
>
> + printk("Updating DCA for Tx queue %d\n", tx_ring->reg_idx);
> +
> switch (hw->mac.type) {
> case ixgbe_mac_82598EB:
> reg_offset = IXGBE_DCA_TXCTRL(tx_ring->reg_idx);
> @@ -940,6 +942,7 @@ static void ixgbe_update_rx_dca(struct ixgbe_adapter
> *adapter,
> u32 rxctrl = dca3_get_tag(rx_ring->dev, cpu);
> u8 reg_idx = rx_ring->reg_idx;
>
> + printk("Updating DCA for Rx queue %d\n", rx_ring->reg_idx);
>
> switch (hw->mac.type) {
> case ixgbe_mac_82599EB:
> @@ -1009,6 +1012,7 @@ static void ixgbe_setup_dca(struct ixgbe_adapter
> *adapter)
> IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, 2);
>
> for (v_idx = 0; v_idx < adapter->num_q_vectors; v_idx++) {
> + printk("Updating q_vector %d\n", v_idx);
> adapter->q_vector[v_idx]->cpu = -1;
> ixgbe_update_dca(adapter->q_vector[v_idx]);
> }
>
>
> On 02/21/2014 08:05 AM, Scott Silverman wrote:
> > I am not certain if SR-IOV is toggled on or off in the motherboard
> > firmware, but I will look this evening. In the meantime, are you aware
> of a
> > way to determine that without entering the firmware? I can tell you that
> > "Intel Virtualization Tech" and "Intel VT-d" are both disabled, and that
> > the kernel is using SWIOTLB, not iommu.
> >
> > I moved the IRQ vector for TxRx0 to core 1, and back to core 0, no change
> > in the DCA_RXCTRL[000].
> >
> >
> >
> >
> > Thanks,
> >
> > Scott Silverman | IT | Simplex Investments | 312-360-2444
> > 230 S. LaSalle St., Suite 4-100, Chicago, IL 60604
> >
> >
> > On Thu, Feb 20, 2014 at 4:38 PM, Alexander Duyck <
> > [email protected]> wrote:
> >
> >> The fact that Rx and Tx ring zero aren't updating is quite odd if you
> >> have a current driver By any chance do you have something like SR-IOV
> >> enabled? That would reserve queues starting at 0, but not enable DCA.
> >>
> >> One thing you might try would be to change the affinity of the TxRx-0
> >> interrupt vector associated with the interface. If it is currently on
> >> CPU 0 try moving it to CPU 1, and then back to 0 to see if that resolves
> >> the issue. I'm still trying to find in the code where this queue could
> >> come up without configuring DCA and that might give me some input on
> >> what is going on.
> >>
> >> Thanks,
> >>
> >> Alex
> >>
> >> On 02/20/2014 01:07 PM, Scott Silverman wrote:
> >>> Sure, I've attached the output.
> >>>
> >>>
> >>>
> >>>
> >>> Thanks,
> >>>
> >>> Scott Silverman | IT | Simplex Investments | 312-360-2444
> >>> 230 S. LaSalle St., Suite 4-100, Chicago, IL 60604
> >>>
> >>>
> >>> On Thu, Feb 20, 2014 at 11:10 AM, Alexander Duyck <
> >>> [email protected]> wrote:
> >>>
> >>>> Could you please re-run the ethregs with the "-s 5:00.1" instead of
> the
> >>>> "-d 8086:10fb" option. Using the device ID will give you the results
> >>>> for both function 0 and function 1. I just want to verify which
> >>>> function we are getting the results for.
> >>>>
> >>>> Thanks,
> >>>>
> >>>> Alex
> >>>>
> >>
> >
>
>
------------------------------------------------------------------------------
Flow-based real-time traffic analytics software. Cisco certified tool.
Monitor traffic, SLAs, QoS, Medianet, WAAS etc. with NetFlow Analyzer
Customize your own dashboards, set traffic alerts and generate reports.
Network behavioral analysis & security monitoring. All-in-one tool.
http://pubads.g.doubleclick.net/gampad/clk?id=126839071&iu=/4140/ostg.clktrk
_______________________________________________
E1000-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/e1000-devel
To learn more about Intel® Ethernet, visit
http://communities.intel.com/community/wired
