Just to you and e1000-devel Hi Daniel,
These types of link partner problems do come up. Most times there is nothing that the end-point system can do about it as the actual problem is on the router/switch side of things. The way end-points get around things like this is start the whole link process again which it looks the driver is doing. So other than it taking a short amount of time to re-establish link there are no side effects doing this. That's all that happens correct? If you were able to plug the end-point system into another router/switch port from another manufacturer or back-to-back to another system you probably won't see the problem. Btw, the cheaper the router/switch the more likely you'll run into things like this. It's all about the quality and validation that goes into the HW. If the manufacturer doesn't spend the time and money to do it the customers see issues like this. Hope this helps (at least a little). Sorry we can't be more help for things like this. Cheers, John > -----Original Message----- > From: [email protected] [mailto:linux-nics- > [email protected]] On Behalf Of Dâniel Fraga > Sent: Sunday, September 08, 2013 5:57 PM > To: Linux NICS > Subject: [linux-nics] e1000e: link up and down issue with TP-Link > WDR4300 router > > Since I bought this motherboard (Asus P8Z68V-Pro Gen/3) I have to > deal sometimes (very rare) with this annoying problem: > > Sep 8 21:24:43 tux kernel: e1000e: eth0 NIC Link is Up 100 Mbps Full > Duplex, Flow Control: Rx/Tx Sep 8 21:24:43 tux kernel: e1000e > 0000:00:19.0 eth0: 10/100 speed: disabling TSO Sep 8 21:24:44 tux > kernel: e1000e: eth0 NIC Link is Down > > It keeps trying to establish the link forever, going up and down. > > Today it happened after I resumed from standby (S3). > > My NIC is: > > 00:19.0 Ethernet controller: Intel Corporation 82579V Gigabit Network > Connection (rev 05) > > If I search in google for "e1000e link up down" I see a LOT of > users complaining. > As far as I remember Alan Cox onde wrote this is a issue with "cheap > chinese router" > but I don't understand why there isn't a workaround for this annoying > problem. > > Usually it establishes the link at 1000 Mbps and as long as I > don't turn off the router (TP-Link WDR-4300), it negotiates the link > speed correctly. > > Is there some workaround for this? If you need more information, > just ask! > > Thanks. > > Ps: I'm using Linux 3.11.0. > > -- > Linux 3.11.0: Linux for Workgroups > http://www.youtube.com/DanielFragaBR > http://www.libertarios.org.br > _______________________________________________ > Linux-nics mailing list > [email protected] ------------------------------------------------------------------------------ Learn the latest--Visual Studio 2012, SharePoint 2013, SQL 2012, more! Discover the easy way to master current and previous Microsoft technologies and advance your career. Get an incredible 1,500+ hours of step-by-step tutorial videos with LearnDevNow. Subscribe today and save! http://pubads.g.doubleclick.net/gampad/clk?id=58041391&iu=/4140/ostg.clktrk _______________________________________________ E1000-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
