Hi,
Today after a few tests and reboot, I load my ixgbe and ixgbevf driver
under Linux kernel 3.6-rc4 (Fedora 15). Suddenly I'm not able to load the
VF driver and I could find the reason. When I load the VF driver, the
message says:
1. ixgbevf: PF still in reset state, assigning new addres
2. ixgbe 0000:01:00.1: vpd r/w failed. This is likely a firmware bug on
this device. Contact the card vendor for a firmware update.
I tried many times with different kernels but still the same. Does this
mean a firmware bug and I have to contact the vendor? Thanks!
Regards,
William
---- The full message is below ----
[ 207.187070] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver -
version 3.9.15-k
[ 207.187075] ixgbe: Copyright (c) 1999-2012 Intel Corporation.
[ 207.412642] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus
01-02]
[ 207.412696] pci 0000:02:10.0: [8086:10ed] type 00 class 0x020000
[ 207.412894] pci 0000:02:10.2: [8086:10ed] type 00 class 0x020000
[ 207.413113] pci 0000:02:10.4: [8086:10ed] type 00 class 0x020000
[ 207.413289] pci 0000:02:10.6: [8086:10ed] type 00 class 0x020000
[ 207.413444] ixgbe 0000:01:00.0: (unregistered net_device): SR-IOV
enabled with 4 VFs
[ 207.437309] ixgbe 0000:01:00.0: irq 48 for MSI/MSI-X
[ 207.437318] ixgbe 0000:01:00.0: irq 49 for MSI/MSI-X
[ 207.437336] ixgbe 0000:01:00.0: Multiqueue Disabled: Rx Queue count = 1,
Tx Queue count = 1
[ 207.437483] ixgbe 0000:01:00.0: registered PHC device on 0000:01:00.0
[ 207.437568] ixgbe 0000:01:00.0: (PCI Express:5.0GT/s:Width x8)
90:e2:ba:05:b2:d8
[ 207.437900] ixgbe 0000:01:00.0: MAC: 2, PHY: 15, SFP+: 5, PBA No:
G18786-003
[ 207.439624] ixgbe 0000:01:00.0: eth0: IOV is enabled with 4 VFs
[ 207.439628] ixgbe 0000:01:00.0: eth0: IOV: VF 0 is enabled MAC
42:90:6a:2a:5d:73
[ 207.439630] ixgbe 0000:01:00.0: eth0: IOV: VF 1 is enabled MAC
86:83:e1:5e:5b:3b
[ 207.439632] ixgbe 0000:01:00.0: eth0: IOV: VF 2 is enabled MAC
f2:3a:0e:58:d5:45
[ 207.439634] ixgbe 0000:01:00.0: eth0: IOV: VF 3 is enabled MAC
aa:bb:5d:bb:73:53
[ 207.439656] ixgbe 0000:01:00.0: Intel(R) 10 Gigabit Network Connection
[ 208.613442] pci 0000:02:10.1: [8086:10ed] type 00 class 0x020000
[ 208.613644] pci 0000:02:10.3: [8086:10ed] type 00 class 0x020000
[ 208.613802] pci 0000:02:10.5: [8086:10ed] type 00 class 0x020000
[ 208.613945] pci 0000:02:10.7: [8086:10ed] type 00 class 0x020000
[ 208.614087] ixgbe 0000:01:00.1: (unregistered net_device): SR-IOV
enabled with 4 VFs
[ 208.637836] ixgbe 0000:01:00.1: irq 50 for MSI/MSI-X
[ 208.637844] ixgbe 0000:01:00.1: irq 51 for MSI/MSI-X
[ 208.637861] ixgbe 0000:01:00.1: Multiqueue Disabled: Rx Queue count = 1,
Tx Queue count = 1
[ 208.638023] ixgbe 0000:01:00.1: registered PHC device on 0000:01:00.1
[ 208.638108] ixgbe 0000:01:00.1: (PCI Express:5.0GT/s:Width x8)
90:e2:ba:05:b2:d9
[ 208.638433] ixgbe 0000:01:00.1: MAC: 2, PHY: 1, PBA No: G18786-003
[ 208.640138] ixgbe 0000:01:00.1: eth1: IOV is enabled with 4 VFs
[ 208.640144] ixgbe 0000:01:00.1: eth1: IOV: VF 0 is enabled MAC
22:b1:63:44:ef:5c
[ 208.640149] ixgbe 0000:01:00.1: eth1: IOV: VF 1 is enabled MAC
7e:43:11:07:f0:28
[ 208.640153] ixgbe 0000:01:00.1: eth1: IOV: VF 2 is enabled MAC
92:32:09:56:66:9d
[ 208.640157] ixgbe 0000:01:00.1: eth1: IOV: VF 3 is enabled MAC
42:5a:36:1f:fb:5c
[ 208.640189] ixgbe 0000:01:00.1: Intel(R) 10 Gigabit Network Connection
[ 219.361571] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function
Network Driver - version 2.6.0-k
[ 219.361575] ixgbevf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 219.361601] ixgbevf 0000:02:10.0: enabling device (0000 -> 0002)
[ 219.362804] ixgbevf 0000:02:10.0: PF still in reset state, assigning new
address
[ 219.362860] ixgbevf 0000:02:10.0: irq 52 for MSI/MSI-X
[ 219.362868] ixgbevf 0000:02:10.0: irq 53 for MSI/MSI-X
[ 219.363091] ixgbevf 0000:02:10.2: enabling device (0000 -> 0002)
[ 219.364247] ixgbevf 0000:02:10.2: PF still in reset state, assigning new
address
[ 219.364290] ixgbevf 0000:02:10.2: irq 54 for MSI/MSI-X
[ 219.364297] ixgbevf 0000:02:10.2: irq 55 for MSI/MSI-X
[ 219.364476] ixgbevf 0000:02:10.4: enabling device (0000 -> 0002)
[ 219.365629] ixgbevf 0000:02:10.4: PF still in reset state, assigning new
address
[ 219.365669] ixgbevf 0000:02:10.4: irq 56 for MSI/MSI-X
[ 219.365676] ixgbevf 0000:02:10.4: irq 57 for MSI/MSI-X
[ 219.365870] ixgbevf 0000:02:10.6: enabling device (0000 -> 0002)
[ 219.367018] ixgbevf 0000:02:10.6: PF still in reset state, assigning new
address
[ 219.367070] ixgbevf 0000:02:10.6: irq 58 for MSI/MSI-X
[ 219.367078] ixgbevf 0000:02:10.6: irq 59 for MSI/MSI-X
[ 219.367207] ixgbevf 0000:02:10.1: enabling device (0000 -> 0002)
[ 219.368333] ixgbevf 0000:02:10.1: PF still in reset state, assigning new
address
[ 219.368351] ixgbevf 0000:02:10.1: irq 60 for MSI/MSI-X
[ 219.368354] ixgbevf 0000:02:10.1: irq 61 for MSI/MSI-X
[ 219.368484] ixgbevf 0000:02:10.3: enabling device (0000 -> 0002)
[ 219.369595] ixgbevf 0000:02:10.3: PF still in reset state, assigning new
address
[ 219.369613] ixgbevf 0000:02:10.3: irq 62 for MSI/MSI-X
[ 219.369617] ixgbevf 0000:02:10.3: irq 63 for MSI/MSI-X
[ 219.369756] ixgbevf 0000:02:10.5: enabling device (0000 -> 0002)
[ 219.370894] ixgbevf 0000:02:10.5: PF still in reset state, assigning new
address
[ 219.370919] ixgbevf 0000:02:10.5: irq 64 for MSI/MSI-X
[ 219.370924] ixgbevf 0000:02:10.5: irq 65 for MSI/MSI-X
[ 219.371260] ixgbevf 0000:02:10.7: enabling device (0000 -> 0002)
[ 219.372385] ixgbevf 0000:02:10.7: PF still in reset state, assigning new
address
[ 219.372412] ixgbevf 0000:02:10.7: irq 66 for MSI/MSI-X
[ 219.372418] ixgbevf 0000:02:10.7: irq 67 for MSI/MSI-X
[ 219.436740] ixgbe 0000:01:00.1: vpd r/w failed. This is likely a
firmware bug on this device. Contact the card vendor for a firmware update.
[ 219.489687] ixgbe 0000:01:00.1: vpd r/w failed. This is likely a
firmware bug on this device. Contact the card vendor for a firmware update.
[ 219.542646] ixgbe 0000:01:00.1: vpd r/w failed. This is likely a
firmware bug on this device. Contact the card vendor for a firmware update.
[ 219.595588] ixgbe 0000:01:00.1: vpd r/w failed. This is likely a
firmware bug on this device. Contact the card vendor for a firmware update.
[ 219.648533] ixgbe 0000:01:00.1: vpd r/w failed. This is likely a
firmware bug on this device. Contact the card vendor for a firmware update.
------------------------------------------------------------------------------
Get 100% visibility into Java/.NET code with AppDynamics Lite!
It's a free troubleshooting tool designed for production.
Get down to code-level detail for bottlenecks, with <2% overhead.
Download for free and get started troubleshooting in minutes.
http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk
_______________________________________________
E1000-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/e1000-devel
To learn more about Intel® Ethernet, visit
http://communities.intel.com/community/wired
