On Sat, Jan 05, 2019 at 05:20:37PM +0000, Jonathan Cameron wrote:
> +CC Jeremy who is also working with this device.
>
> On Sun, 23 Dec 2018 19:32:24 +0530
> Shreeya Patel <shreeya.patel23...@gmail.com> wrote:
>
> > Both i2c and spi drivers have functions for reading and writing
> > to/from registers. Remove this redundant and common code by using
> > regmap API.
> > Also remove multi_read and multi_write functions from i2c
> > and spi driver as they are not being used anywhere.
> >
> > Signed-off-by: Shreeya Patel <shreeya.patel23...@gmail.com>
>
> I would have preferred an initial patch that removed the multi_read
> and multi_write first as that would (I assume) be easily separated
> from the 'major' change of moving to regmap. I also suggest
> another section to pull out to a precursor patch below.
>
> The result looks fine to me.
>
> Thanks,
>
> Jonathan
>
> > ---
> > drivers/staging/iio/addac/adt7316-i2c.c | 101 ++--------------
> > drivers/staging/iio/addac/adt7316-spi.c | 94 +++------------
> > drivers/staging/iio/addac/adt7316.c | 147 ++++++++++++------------
> > drivers/staging/iio/addac/adt7316.h | 15 +--
> > 4 files changed, 103 insertions(+), 254 deletions(-)
> >
> > diff --git a/drivers/staging/iio/addac/adt7316-i2c.c
> > b/drivers/staging/iio/addac/adt7316-i2c.c
> > index ac91163656b5..435b65845174 100644
> > --- a/drivers/staging/iio/addac/adt7316-i2c.c
> > +++ b/drivers/staging/iio/addac/adt7316-i2c.c
> > @@ -12,105 +12,28 @@
> > #include <linux/i2c.h>
> > #include <linux/interrupt.h>
> > #include <linux/module.h>
> > +#include <linux/regmap.h>
> >
> > #include "adt7316.h"
> >
> > -/*
> > - * adt7316 register access by I2C
> > - */
> > -static int adt7316_i2c_read(void *client, u8 reg, u8 *data)
> > -{
> > - struct i2c_client *cl = client;
> > - int ret;
> > -
> > - ret = i2c_smbus_write_byte(cl, reg);
> > - if (ret < 0) {
> > - dev_err(&cl->dev, "I2C fail to select reg\n");
> > - return ret;
> > - }
> > -
> > - ret = i2c_smbus_read_byte(client);
> > -
> > - if (!ret)
> > - return -EIO;
> > -
> > - if (ret < 0) {
> > - dev_err(&cl->dev, "I2C read error\n");
> > - return ret;
> > - }
> > -
> > - *data = ret;
> > -
> > - return 0;
> > -}
> > -
> > -static int adt7316_i2c_write(void *client, u8 reg, u8 data)
> > -{
> > - struct i2c_client *cl = client;
> > - int ret = 0;
> > -
> > - ret = i2c_smbus_write_byte_data(cl, reg, data);
> > - if (ret < 0)
> > - dev_err(&cl->dev, "I2C write error\n");
> > -
> > - return ret;
> > -}
> > -
> > -static int adt7316_i2c_multi_read(void *client, u8 reg, u8 count, u8 *data)
> > -{
> > - struct i2c_client *cl = client;
> > - int i, ret = 0;
> > -
> > - if (count > ADT7316_REG_MAX_ADDR)
> > - count = ADT7316_REG_MAX_ADDR;
> > -
> > - for (i = 0; i < count; i++) {
> > - ret = adt7316_i2c_read(cl, reg, &data[i]);
> > - if (ret < 0) {
> > - dev_err(&cl->dev, "I2C multi read error\n");
> > - return ret;
> > - }
> > - }
> > -
> > - return 0;
> > -}
> > -
> > -static int adt7316_i2c_multi_write(void *client, u8 reg, u8 count, u8
> > *data)
> > -{
> > - struct i2c_client *cl = client;
> > - int i, ret = 0;
> > -
> > - if (count > ADT7316_REG_MAX_ADDR)
> > - count = ADT7316_REG_MAX_ADDR;
> > -
> > - for (i = 0; i < count; i++) {
> > - ret = adt7316_i2c_write(cl, reg, data[i]);
> > - if (ret < 0) {
> > - dev_err(&cl->dev, "I2C multi write error\n");
> > - return ret;
> > - }
> > - }
> > -
> > - return 0;
> > -}
> > -
> > /*
> > * device probe and remove
> > */
> > -
> > static int adt7316_i2c_probe(struct i2c_client *client,
> > const struct i2c_device_id *id)
> > {
> > - struct adt7316_bus bus = {
> > - .client = client,
> > - .irq = client->irq,
> > - .read = adt7316_i2c_read,
> > - .write = adt7316_i2c_write,
> > - .multi_read = adt7316_i2c_multi_read,
> > - .multi_write = adt7316_i2c_multi_write,
> > - };
> > + struct regmap *regmap;
> > +
> > + regmap = devm_regmap_init_i2c(client, &adt7316_regmap_config);
> > +
> > + if (IS_ERR(regmap)) {
> > + dev_err(&client->dev, "Error initializing i2c regmap: %ld\n",
> > + PTR_ERR(regmap));
> > + return PTR_ERR(regmap);
> > + }
> >
> > - return adt7316_probe(&client->dev, &bus, id->name);
> > + return adt7316_probe(&client->dev, regmap, id ? id->name : NULL,
> > + client->irq);
> > }
> >
> > static const struct i2c_device_id adt7316_i2c_id[] = {
> > diff --git a/drivers/staging/iio/addac/adt7316-spi.c
> > b/drivers/staging/iio/addac/adt7316-spi.c
> > index e75827e326a6..9e3decb5cb77 100644
> > --- a/drivers/staging/iio/addac/adt7316-spi.c
> > +++ b/drivers/staging/iio/addac/adt7316-spi.c
> > @@ -11,79 +11,12 @@
> > #include <linux/kernel.h>
> > #include <linux/module.h>
> > #include <linux/interrupt.h>
> > +#include <linux/regmap.h>
> > #include <linux/spi/spi.h>
> >
> > #include "adt7316.h"
> >
> > #define ADT7316_SPI_MAX_FREQ_HZ 5000000
> > -#define ADT7316_SPI_CMD_READ 0x91
> > -#define ADT7316_SPI_CMD_WRITE 0x90
> > -
> > -/*
> > - * adt7316 register access by SPI
> > - */
> > -
> > -static int adt7316_spi_multi_read(void *client, u8 reg, u8 count, u8 *data)
> > -{
> > - struct spi_device *spi_dev = client;
> > - u8 cmd[2];
> > - int ret = 0;
> > -
> > - if (count > ADT7316_REG_MAX_ADDR)
> > - count = ADT7316_REG_MAX_ADDR;
> > -
> > - cmd[0] = ADT7316_SPI_CMD_WRITE;
> > - cmd[1] = reg;
> > -
> > - ret = spi_write(spi_dev, cmd, 2);
> > - if (ret < 0) {
> > - dev_err(&spi_dev->dev, "SPI fail to select reg\n");
> > - return ret;
> > - }
> > -
> > - cmd[0] = ADT7316_SPI_CMD_READ;
> > -
> > - ret = spi_write_then_read(spi_dev, cmd, 1, data, count);
> > - if (ret < 0) {
> > - dev_err(&spi_dev->dev, "SPI read data error\n");
> > - return ret;
> > - }
> > -
> > - return 0;
> > -}
> > -
> > -static int adt7316_spi_multi_write(void *client, u8 reg, u8 count, u8
> > *data)
> > -{
> > - struct spi_device *spi_dev = client;
> > - u8 buf[ADT7316_REG_MAX_ADDR + 2];
> > - int i, ret = 0;
> > -
> > - if (count > ADT7316_REG_MAX_ADDR)
> > - count = ADT7316_REG_MAX_ADDR;
> > -
> > - buf[0] = ADT7316_SPI_CMD_WRITE;
> > - buf[1] = reg;
> > - for (i = 0; i < count; i++)
> > - buf[i + 2] = data[i];
> > -
> > - ret = spi_write(spi_dev, buf, count + 2);
> > - if (ret < 0) {
> > - dev_err(&spi_dev->dev, "SPI write error\n");
> > - return ret;
> > - }
> > -
> > - return ret;
> > -}
> > -
> > -static int adt7316_spi_read(void *client, u8 reg, u8 *data)
> > -{
> > - return adt7316_spi_multi_read(client, reg, 1, data);
> > -}
> > -
> > -static int adt7316_spi_write(void *client, u8 reg, u8 val)
> > -{
> > - return adt7316_spi_multi_write(client, reg, 1, &val);
> > -}
> >
> > /*
> > * device probe and remove
> > @@ -91,14 +24,7 @@ static int adt7316_spi_write(void *client, u8 reg, u8
> > val)
> >
> > static int adt7316_spi_probe(struct spi_device *spi_dev)
> > {
> > - struct adt7316_bus bus = {
> > - .client = spi_dev,
> > - .irq = spi_dev->irq,
> > - .read = adt7316_spi_read,
> > - .write = adt7316_spi_write,
> > - .multi_read = adt7316_spi_multi_read,
> > - .multi_write = adt7316_spi_multi_write,
> > - };
> > + struct regmap *regmap;
> >
> > /* don't exceed max specified SPI CLK frequency */
> > if (spi_dev->max_speed_hz > ADT7316_SPI_MAX_FREQ_HZ) {
> > @@ -107,12 +33,20 @@ static int adt7316_spi_probe(struct spi_device
> > *spi_dev)
> > return -EINVAL;
> > }
> >
> > + regmap = devm_regmap_init_spi(spi_dev, &adt7316_regmap_config);
> > + if (IS_ERR(regmap)) {
> > + dev_err(&spi_dev->dev, "Error initializing spi regmap: %ld\n",
> > + PTR_ERR(regmap));
> > + return PTR_ERR(regmap);
> > + }
> > +
> > /* switch from default I2C protocol to SPI protocol */
> > - adt7316_spi_write(spi_dev, 0, 0);
> > - adt7316_spi_write(spi_dev, 0, 0);
> > - adt7316_spi_write(spi_dev, 0, 0);
> > + regmap_write(regmap, 0, 0);
> > + regmap_write(regmap, 0, 0);
> > + regmap_write(regmap, 0, 0);
> >
> > - return adt7316_probe(&spi_dev->dev, &bus, spi_dev->modalias);
> > + return adt7316_probe(&spi_dev->dev, regmap, spi_dev->modalias,
> > + spi_dev->irq);
> > }
> >
> > static const struct spi_device_id adt7316_spi_id[] = {
> > diff --git a/drivers/staging/iio/addac/adt7316.c
> > b/drivers/staging/iio/addac/adt7316.c
> > index 1ca4ee0f30ee..be2330a42706 100644
> > --- a/drivers/staging/iio/addac/adt7316.c
> > +++ b/drivers/staging/iio/addac/adt7316.c
> > @@ -17,6 +17,7 @@
> > #include <linux/list.h>
> > #include <linux/i2c.h>
> > #include <linux/rtc.h>
> > +#include <linux/regmap.h>
> > #include <linux/module.h>
> >
> > #include <linux/iio/iio.h>
> > @@ -176,7 +177,7 @@
> > */
> >
> > struct adt7316_chip_info {
> > - struct adt7316_bus bus;
> > + struct regmap *regmap;
> > struct gpio_desc *ldac_pin;
> > u16 int_mask; /* 0x2f */
> > u8 config1;
> > @@ -237,7 +238,7 @@ static ssize_t _adt7316_store_enabled(struct
> > adt7316_chip_info *chip,
> > else
> > config1 = chip->config1 & ~ADT7316_EN;
> >
> > - ret = chip->bus.write(chip->bus.client, ADT7316_CONFIG1, config1);
> > + ret = regmap_write(chip->regmap, ADT7316_CONFIG1, config1);
> > if (ret)
> > return -EIO;
> >
> > @@ -301,7 +302,7 @@ static ssize_t adt7316_store_select_ex_temp(struct
> > device *dev,
> > if (buf[0] == '1')
> > config1 |= ADT7516_SEL_EX_TEMP;
> >
> > - ret = chip->bus.write(chip->bus.client, ADT7316_CONFIG1, config1);
> > + ret = regmap_write(chip->regmap, ADT7316_CONFIG1, config1);
> > if (ret)
> > return -EIO;
> >
> > @@ -342,7 +343,7 @@ static ssize_t adt7316_store_mode(struct device *dev,
> > if (!memcmp(buf, "single_channel", 14))
> > config2 |= ADT7316_AD_SINGLE_CH_MODE;
> >
> > - ret = chip->bus.write(chip->bus.client, ADT7316_CONFIG2, config2);
> > + ret = regmap_write(chip->regmap, ADT7316_CONFIG2, config2);
> > if (ret)
> > return -EIO;
> >
> > @@ -435,7 +436,7 @@ static ssize_t adt7316_store_ad_channel(struct device
> > *dev,
> >
> > config2 |= data;
> >
> > - ret = chip->bus.write(chip->bus.client, ADT7316_CONFIG2, config2);
> > + ret = regmap_write(chip->regmap, ADT7316_CONFIG2, config2);
> > if (ret)
> > return -EIO;
> >
> > @@ -495,7 +496,7 @@ static ssize_t adt7316_store_disable_averaging(struct
> > device *dev,
> > if (buf[0] == '1')
> > config2 |= ADT7316_DISABLE_AVERAGING;
> >
> > - ret = chip->bus.write(chip->bus.client, ADT7316_CONFIG2, config2);
> > + ret = regmap_write(chip->regmap, ADT7316_CONFIG2, config2);
> > if (ret)
> > return -EIO;
> >
> > @@ -534,7 +535,7 @@ static ssize_t
> > adt7316_store_enable_smbus_timeout(struct device *dev,
> > if (buf[0] == '1')
> > config2 |= ADT7316_EN_SMBUS_TIMEOUT;
> >
> > - ret = chip->bus.write(chip->bus.client, ADT7316_CONFIG2, config2);
> > + ret = regmap_write(chip->regmap, ADT7316_CONFIG2, config2);
> > if (ret)
> > return -EIO;
> >
> > @@ -572,7 +573,7 @@ static ssize_t adt7316_store_powerdown(struct device
> > *dev,
> > if (buf[0] == '1')
> > config1 |= ADT7316_PD;
> >
> > - ret = chip->bus.write(chip->bus.client, ADT7316_CONFIG1, config1);
> > + ret = regmap_write(chip->regmap, ADT7316_CONFIG1, config1);
> > if (ret)
> > return -EIO;
> >
> > @@ -610,7 +611,7 @@ static ssize_t adt7316_store_fast_ad_clock(struct
> > device *dev,
> > if (buf[0] == '1')
> > config3 |= ADT7316_ADCLK_22_5;
> >
> > - ret = chip->bus.write(chip->bus.client, ADT7316_CONFIG3, config3);
> > + ret = regmap_write(chip->regmap, ADT7316_CONFIG3, config3);
> > if (ret)
> > return -EIO;
> >
> > @@ -663,7 +664,7 @@ static ssize_t adt7316_store_da_high_resolution(struct
> > device *dev,
> > config3 = chip->config3 & (~ADT7316_DA_HIGH_RESOLUTION);
> > }
> >
> > - ret = chip->bus.write(chip->bus.client, ADT7316_CONFIG3, config3);
> > + ret = regmap_write(chip->regmap, ADT7316_CONFIG3, config3);
> > if (ret)
> > return -EIO;
> >
> > @@ -709,7 +710,7 @@ static ssize_t adt7316_store_AIN_internal_Vref(struct
> > device *dev,
> > else
> > config3 = chip->config3 | ADT7516_AIN_IN_VREF;
> >
> > - ret = chip->bus.write(chip->bus.client, ADT7316_CONFIG3, config3);
> > + ret = regmap_write(chip->regmap, ADT7316_CONFIG3, config3);
> > if (ret)
> > return -EIO;
> >
> > @@ -748,7 +749,7 @@ static ssize_t adt7316_store_enable_prop_DACA(struct
> > device *dev,
> > if (buf[0] == '1')
> > config3 |= ADT7316_EN_IN_TEMP_PROP_DACA;
> >
> > - ret = chip->bus.write(chip->bus.client, ADT7316_CONFIG3, config3);
> > + ret = regmap_write(chip->regmap, ADT7316_CONFIG3, config3);
> > if (ret)
> > return -EIO;
> >
> > @@ -787,7 +788,7 @@ static ssize_t adt7316_store_enable_prop_DACB(struct
> > device *dev,
> > if (buf[0] == '1')
> > config3 |= ADT7316_EN_EX_TEMP_PROP_DACB;
> >
> > - ret = chip->bus.write(chip->bus.client, ADT7316_CONFIG3, config3);
> > + ret = regmap_write(chip->regmap, ADT7316_CONFIG3, config3);
> > if (ret)
> > return -EIO;
> >
> > @@ -830,7 +831,7 @@ static ssize_t adt7316_store_DAC_2Vref_ch_mask(struct
> > device *dev,
> > dac_config = chip->dac_config & (~ADT7316_DA_2VREF_CH_MASK);
> > dac_config |= data;
> >
> > - ret = chip->bus.write(chip->bus.client, ADT7316_DAC_CONFIG, dac_config);
> > + ret = regmap_write(chip->regmap, ADT7316_DAC_CONFIG, dac_config);
> > if (ret)
> > return -EIO;
> >
> > @@ -890,7 +891,7 @@ static ssize_t adt7316_store_DAC_update_mode(struct
> > device *dev,
> > dac_config = chip->dac_config & (~ADT7316_DA_EN_MODE_MASK);
> > dac_config |= data;
> >
> > - ret = chip->bus.write(chip->bus.client, ADT7316_DAC_CONFIG, dac_config);
> > + ret = regmap_write(chip->regmap, ADT7316_DAC_CONFIG, dac_config);
> > if (ret)
> > return -EIO;
> >
> > @@ -945,8 +946,8 @@ static ssize_t adt7316_store_update_DAC(struct device
> > *dev,
> > ldac_config = chip->ldac_config & (~ADT7316_LDAC_EN_DA_MASK);
> > ldac_config |= data;
> >
> > - ret = chip->bus.write(chip->bus.client, ADT7316_LDAC_CONFIG,
> > - ldac_config);
> > + ret = regmap_write(chip->regmap, ADT7316_LDAC_CONFIG,
> > + ldac_config);
> > if (ret)
> > return -EIO;
> > } else {
> > @@ -993,7 +994,7 @@ static ssize_t adt7316_store_DA_AB_Vref_bypass(struct
> > device *dev,
> > if (buf[0] == '1')
> > dac_config |= ADT7316_VREF_BYPASS_DAC_AB;
> >
> > - ret = chip->bus.write(chip->bus.client, ADT7316_DAC_CONFIG, dac_config);
> > + ret = regmap_write(chip->regmap, ADT7316_DAC_CONFIG, dac_config);
> > if (ret)
> > return -EIO;
> >
> > @@ -1038,7 +1039,7 @@ static ssize_t adt7316_store_DA_CD_Vref_bypass(struct
> > device *dev,
> > if (buf[0] == '1')
> > dac_config |= ADT7316_VREF_BYPASS_DAC_CD;
> >
> > - ret = chip->bus.write(chip->bus.client, ADT7316_DAC_CONFIG, dac_config);
> > + ret = regmap_write(chip->regmap, ADT7316_DAC_CONFIG, dac_config);
> > if (ret)
> > return -EIO;
> >
> > @@ -1098,8 +1099,7 @@ static ssize_t adt7316_store_DAC_internal_Vref(struct
> > device *dev,
> > ldac_config = chip->ldac_config | ADT7316_DAC_IN_VREF;
> > }
> >
> > - ret = chip->bus.write(chip->bus.client, ADT7316_LDAC_CONFIG,
> > - ldac_config);
> > + ret = regmap_write(chip->regmap, ADT7316_LDAC_CONFIG, ldac_config);
> > if (ret)
> > return -EIO;
> >
> > @@ -1117,7 +1117,7 @@ static ssize_t adt7316_show_ad(struct
> > adt7316_chip_info *chip,
> > int channel, char *buf)
> > {
> > u16 data;
> > - u8 msb, lsb;
> > + unsigned int msb, lsb;
> > char sign = ' ';
> > int ret;
> >
> > @@ -1127,13 +1127,12 @@ static ssize_t adt7316_show_ad(struct
> > adt7316_chip_info *chip,
> >
> > switch (channel) {
> > case ADT7316_AD_SINGLE_CH_IN:
> > - ret = chip->bus.read(chip->bus.client,
> > - ADT7316_LSB_IN_TEMP_VDD, &lsb);
> > + ret = regmap_read(chip->regmap, ADT7316_LSB_IN_TEMP_VDD, &lsb);
> > if (ret)
> > return -EIO;
> >
> > - ret = chip->bus.read(chip->bus.client,
> > - ADT7316_AD_MSB_DATA_BASE + channel, &msb);
> > + ret = regmap_read(chip->regmap,
> > + ADT7316_AD_MSB_DATA_BASE + channel, &msb);
> > if (ret)
> > return -EIO;
> >
> > @@ -1141,14 +1140,12 @@ static ssize_t adt7316_show_ad(struct
> > adt7316_chip_info *chip,
> > data |= lsb & ADT7316_LSB_IN_TEMP_MASK;
> > break;
> > case ADT7316_AD_SINGLE_CH_VDD:
> > - ret = chip->bus.read(chip->bus.client,
> > - ADT7316_LSB_IN_TEMP_VDD, &lsb);
> > + ret = regmap_read(chip->regmap, ADT7316_LSB_IN_TEMP_VDD, &lsb);
> > if (ret)
> > return -EIO;
> >
> > - ret = chip->bus.read(chip->bus.client,
> > -
> > - ADT7316_AD_MSB_DATA_BASE + channel, &msb);
> > + ret = regmap_read(chip->regmap,
> > + ADT7316_AD_MSB_DATA_BASE + channel, &msb);
> > if (ret)
> > return -EIO;
> >
> > @@ -1156,13 +1153,12 @@ static ssize_t adt7316_show_ad(struct
> > adt7316_chip_info *chip,
> > data |= (lsb & ADT7316_LSB_VDD_MASK) >> ADT7316_LSB_VDD_OFFSET;
> > return sprintf(buf, "%d\n", data);
> > default: /* ex_temp and ain */
> > - ret = chip->bus.read(chip->bus.client,
> > - ADT7316_LSB_EX_TEMP_AIN, &lsb);
> > + ret = regmap_read(chip->regmap, ADT7316_LSB_EX_TEMP_AIN, &lsb);
> > if (ret)
> > return -EIO;
> >
> > - ret = chip->bus.read(chip->bus.client,
> > - ADT7316_AD_MSB_DATA_BASE + channel, &msb);
> > + ret = regmap_read(chip->regmap,
> > + ADT7316_AD_MSB_DATA_BASE + channel, &msb);
> > if (ret)
> > return -EIO;
> >
> > @@ -1262,10 +1258,10 @@ static ssize_t adt7316_show_temp_offset(struct
> > adt7316_chip_info *chip,
> > int offset_addr, char *buf)
> > {
> > int data;
> > - u8 val;
> > + unsigned int val;
> > int ret;
> >
> > - ret = chip->bus.read(chip->bus.client, offset_addr, &val);
> > + ret = regmap_read(chip->regmap, offset_addr, &val);
> > if (ret)
> > return -EIO;
> >
> > @@ -1292,7 +1288,7 @@ static ssize_t adt7316_store_temp_offset(struct
> > adt7316_chip_info *chip,
> >
> > val = (u8)data;
> >
> > - ret = chip->bus.write(chip->bus.client, offset_addr, val);
> > + ret = regmap_write(chip->regmap, offset_addr, val);
> > if (ret)
> > return -EIO;
> >
> > @@ -1409,7 +1405,7 @@ static ssize_t adt7316_show_DAC(struct
> > adt7316_chip_info *chip,
> > int channel, char *buf)
> > {
> > u16 data;
> > - u8 msb, lsb, offset;
> > + unsigned int msb, lsb, offset;
> > int ret;
> >
> > if (channel >= ADT7316_DA_MSB_DATA_REGS ||
> > @@ -1422,14 +1418,14 @@ static ssize_t adt7316_show_DAC(struct
> > adt7316_chip_info *chip,
> > offset = chip->dac_bits - 8;
> >
> > if (chip->dac_bits > 8) {
> > - ret = chip->bus.read(chip->bus.client,
> > - ADT7316_DA_DATA_BASE + channel * 2, &lsb);
> > + ret = regmap_read(chip->regmap,
> > + ADT7316_DA_DATA_BASE + channel * 2, &lsb);
> > if (ret)
> > return -EIO;
> > }
> >
> > - ret = chip->bus.read(chip->bus.client,
> > - ADT7316_DA_DATA_BASE + 1 + channel * 2, &msb);
> > + ret = regmap_read(chip->regmap, ADT7316_DA_DATA_BASE + 1 + channel * 2,
> > + &msb);
> > if (ret)
> > return -EIO;
> >
> > @@ -1460,15 +1456,15 @@ static ssize_t adt7316_store_DAC(struct
> > adt7316_chip_info *chip,
> >
> > if (chip->dac_bits > 8) {
> > lsb = data & (1 << offset);
> > - ret = chip->bus.write(chip->bus.client,
> > - ADT7316_DA_DATA_BASE + channel * 2, lsb);
> > + ret = regmap_write(chip->regmap,
> > + ADT7316_DA_DATA_BASE + channel * 2, lsb);
> > if (ret)
> > return -EIO;
> > }
> >
> > msb = data >> offset;
> > - ret = chip->bus.write(chip->bus.client,
> > - ADT7316_DA_DATA_BASE + 1 + channel * 2, msb);
> > + ret = regmap_write(chip->regmap, ADT7316_DA_DATA_BASE + 1 + channel * 2,
> > + msb);
> > if (ret)
> > return -EIO;
> >
> > @@ -1577,10 +1573,10 @@ static ssize_t adt7316_show_device_id(struct device
> > *dev,
> > {
> > struct iio_dev *dev_info = dev_to_iio_dev(dev);
> > struct adt7316_chip_info *chip = iio_priv(dev_info);
> > - u8 id;
> > + unsigned int id;
> > int ret;
> >
> > - ret = chip->bus.read(chip->bus.client, ADT7316_DEVICE_ID, &id);
> > + ret = regmap_read(chip->regmap, ADT7316_DEVICE_ID, &id);
> > if (ret)
> > return -EIO;
> >
> > @@ -1595,10 +1591,10 @@ static ssize_t adt7316_show_manufactorer_id(struct
> > device *dev,
> > {
> > struct iio_dev *dev_info = dev_to_iio_dev(dev);
> > struct adt7316_chip_info *chip = iio_priv(dev_info);
> > - u8 id;
> > + unsigned int id;
> > int ret;
> >
> > - ret = chip->bus.read(chip->bus.client, ADT7316_MANUFACTURE_ID, &id);
> > + ret = regmap_read(chip->regmap, ADT7316_MANUFACTURE_ID, &id);
> > if (ret)
> > return -EIO;
> >
> > @@ -1614,10 +1610,10 @@ static ssize_t adt7316_show_device_rev(struct
> > device *dev,
> > {
> > struct iio_dev *dev_info = dev_to_iio_dev(dev);
> > struct adt7316_chip_info *chip = iio_priv(dev_info);
> > - u8 rev;
> > + unsigned int rev;
> > int ret;
> >
> > - ret = chip->bus.read(chip->bus.client, ADT7316_DEVICE_REV, &rev);
> > + ret = regmap_read(chip->regmap, ADT7316_DEVICE_REV, &rev);
> > if (ret)
> > return -EIO;
> >
> > @@ -1632,10 +1628,10 @@ static ssize_t adt7316_show_bus_type(struct device
> > *dev,
> > {
> > struct iio_dev *dev_info = dev_to_iio_dev(dev);
> > struct adt7316_chip_info *chip = iio_priv(dev_info);
> > - u8 stat;
> > + unsigned int stat;
> > int ret;
> >
> > - ret = chip->bus.read(chip->bus.client, ADT7316_SPI_LOCK_STAT, &stat);
> > + ret = regmap_read(chip->regmap, ADT7316_SPI_LOCK_STAT, &stat);
> > if (ret)
> > return -EIO;
> >
> > @@ -1740,11 +1736,11 @@ static irqreturn_t adt7316_event_handler(int irq,
> > void *private)
> > {
> > struct iio_dev *indio_dev = private;
> > struct adt7316_chip_info *chip = iio_priv(indio_dev);
> > - u8 stat1, stat2;
> > + unsigned int stat1, stat2;
> > int ret;
> > s64 time;
> >
> > - ret = chip->bus.read(chip->bus.client, ADT7316_INT_STAT1, &stat1);
> > + ret = regmap_read(chip->regmap, ADT7316_INT_STAT1, &stat1);
> > if (!ret) {
> > if ((chip->id & ID_FAMILY_MASK) != ID_ADT75XX)
> > stat1 &= 0x1F;
> > @@ -1793,7 +1789,7 @@ static irqreturn_t adt7316_event_handler(int irq,
> > void *private)
> > IIO_EV_DIR_EITHER),
> > time);
> > }
> > - ret = chip->bus.read(chip->bus.client, ADT7316_INT_STAT2, &stat2);
> > + ret = regmap_read(chip->regmap, ADT7316_INT_STAT2, &stat2);
> > if (!ret) {
> > if (stat2 & ADT7316_INT_MASK2_VDD)
> > iio_push_event(indio_dev,
> > @@ -1807,12 +1803,12 @@ static irqreturn_t adt7316_event_handler(int irq,
> > void *private)
> > return IRQ_HANDLED;
> > }
> >
> > -static int adt7316_setup_irq(struct iio_dev *indio_dev)
> > +static int adt7316_setup_irq(struct iio_dev *indio_dev, int irq)
> > {
> > struct adt7316_chip_info *chip = iio_priv(indio_dev);
> > int irq_type, ret;
> >
> > - irq_type = irqd_get_trigger_type(irq_get_irq_data(chip->bus.irq));
> > + irq_type = irqd_get_trigger_type(irq_get_irq_data(irq));
> >
> > switch (irq_type) {
> > case IRQF_TRIGGER_HIGH:
> > @@ -1828,13 +1824,12 @@ static int adt7316_setup_irq(struct iio_dev
> > *indio_dev)
> > break;
> > }
> >
> > - ret = devm_request_threaded_irq(&indio_dev->dev, chip->bus.irq,
> > + ret = devm_request_threaded_irq(&indio_dev->dev, irq,
> > NULL, adt7316_event_handler,
> > irq_type | IRQF_ONESHOT,
> > indio_dev->name, indio_dev);
> > if (ret) {
> > - dev_err(&indio_dev->dev, "failed to request irq %d\n",
> > - chip->bus.irq);
> > + dev_err(&indio_dev->dev, "failed to request irq %d\n", irq);
> > return ret;
> > }
> >
> > @@ -1880,7 +1875,7 @@ static ssize_t adt7316_set_int_mask(struct device
> > *dev,
> > else
> > mask = ADT7316_INT_MASK2_VDD; /* disable vdd int */
> >
> > - ret = chip->bus.write(chip->bus.client, ADT7316_INT_MASK2, mask);
> > + ret = regmap_write(chip->regmap, ADT7316_INT_MASK2, mask);
> > if (!ret) {
> > chip->int_mask &= ~ADT7316_VDD_INT_MASK;
> > chip->int_mask |= data & ADT7316_VDD_INT_MASK;
> > @@ -1894,7 +1889,7 @@ static ssize_t adt7316_set_int_mask(struct device
> > *dev,
> > /* mask in reg is opposite, set 1 to disable */
> > mask = (~data) & ADT7316_TEMP_AIN_INT_MASK;
> > }
> > - ret = chip->bus.write(chip->bus.client, ADT7316_INT_MASK1, mask);
> > + ret = regmap_write(chip->regmap, ADT7316_INT_MASK1, mask);
> >
> > chip->int_mask = mask;
> >
> > @@ -1908,7 +1903,7 @@ static inline ssize_t adt7316_show_ad_bound(struct
> > device *dev,
> > struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
> > struct iio_dev *dev_info = dev_to_iio_dev(dev);
> > struct adt7316_chip_info *chip = iio_priv(dev_info);
> > - u8 val;
> > + unsigned int val;
> > int data;
> > int ret;
> >
> > @@ -1916,7 +1911,7 @@ static inline ssize_t adt7316_show_ad_bound(struct
> > device *dev,
> > this_attr->address > ADT7316_EX_TEMP_LOW)
> > return -EPERM;
> >
> > - ret = chip->bus.read(chip->bus.client, this_attr->address, &val);
> > + ret = regmap_read(chip->regmap, this_attr->address, &val);
> > if (ret)
> > return -EIO;
> >
> > @@ -1965,7 +1960,7 @@ static inline ssize_t adt7316_set_ad_bound(struct
> > device *dev,
> >
> > val = (u8)data;
> >
> > - ret = chip->bus.write(chip->bus.client, this_attr->address, val);
> > + ret = regmap_write(chip->regmap, this_attr->address, val);
> > if (ret)
> > return -EIO;
> >
> > @@ -1996,7 +1991,7 @@ static ssize_t adt7316_set_int_enabled(struct device
> > *dev,
> > if (buf[0] == '1')
> > config1 |= ADT7316_INT_EN;
> >
> > - ret = chip->bus.write(chip->bus.client, ADT7316_CONFIG1, config1);
> > + ret = regmap_write(chip->regmap, ADT7316_CONFIG1, config1);
> > if (ret)
> > return -EIO;
> >
> > @@ -2133,8 +2128,8 @@ static const struct iio_info adt7516_info = {
> > /*
> > * device probe and remove
> > */
> > -int adt7316_probe(struct device *dev, struct adt7316_bus *bus,
> > - const char *name)
> > +int adt7316_probe(struct device *dev, struct regmap *regmap, const char
> > *name,
> > + int irq)
> > {
> > struct adt7316_chip_info *chip;
> > struct iio_dev *indio_dev;
> > @@ -2147,7 +2142,7 @@ int adt7316_probe(struct device *dev, struct
> > adt7316_bus *bus,
> > /* this is only used for device removal purposes */
> > dev_set_drvdata(dev, indio_dev);
> >
> > - chip->bus = *bus;
> > + chip->regmap = regmap;
> >
> > if (name[4] == '3')
> > chip->id = ID_ADT7316 + (name[6] - '6');
> > @@ -2180,17 +2175,17 @@ int adt7316_probe(struct device *dev, struct
> > adt7316_bus *bus,
> > indio_dev->name = name;
> > indio_dev->modes = INDIO_DIRECT_MODE;
> >
> > - if (chip->bus.irq > 0) {
> > - ret = adt7316_setup_irq(indio_dev);
> > + if (irq > 0) {
> > + ret = adt7316_setup_irq(indio_dev, irq);
>
> This may also have been clearer as a separate patch before the regmap
> one that moved to passing in irq rather than getting it from the bus
> route. It is a necessary change to implement regmap but it can be
> done separately before the regmap patch I think...
>
> > if (ret)
> > return ret;
> > }
> >
> > - ret = chip->bus.write(chip->bus.client, ADT7316_CONFIG1, chip->config1);
> > + ret = regmap_write(chip->regmap, ADT7316_CONFIG1, chip->config1);
> > if (ret)
> > return -EIO;
> >
> > - ret = chip->bus.write(chip->bus.client, ADT7316_CONFIG3, chip->config3);
> > + ret = regmap_write(chip->regmap, ADT7316_CONFIG3, chip->config3);
> > if (ret)
> > return -EIO;
> >
> > diff --git a/drivers/staging/iio/addac/adt7316.h
> > b/drivers/staging/iio/addac/adt7316.h
> > index fd7c5c92b599..2c72cf3f71cd 100644
> > --- a/drivers/staging/iio/addac/adt7316.h
> > +++ b/drivers/staging/iio/addac/adt7316.h
> > @@ -11,16 +11,13 @@
> >
> > #include <linux/types.h>
> > #include <linux/pm.h>
> > +#include <linux/regmap.h>
> >
> > #define ADT7316_REG_MAX_ADDR 0x3F
> >
> > -struct adt7316_bus {
> > - void *client;
> > - int irq;
> > - int (*read)(void *client, u8 reg, u8 *data);
> > - int (*write)(void *client, u8 reg, u8 val);
> > - int (*multi_read)(void *client, u8 first_reg, u8 count, u8 *data);
> > - int (*multi_write)(void *client, u8 first_reg, u8 count, u8 *data);
> > +static const struct regmap_config adt7316_regmap_config = {
> > + .reg_bits = 8,
> > + .val_bits = 10,
I wonder if val_bits should be 8. The driver can read and write 8, 10,
or 12 bit values. In the 10 and 12 bit cases, the driver currently
(including with this patch) does two separate reads or writes and expects
an 8 bit result from each. It then parses these two values to come up with
the 10 or 12 bit value. I don't think the logic for this calculation is
known to regmap, so with the current form of the patch, I think val_bits
should be 8. Maybe there is a better way to do it though?
I would have tested this but I couldn't get the patch to apply. Shreeya,
I think if you rebase against iio/testing that might take care of it. I
can then do some testing with v2.
Jeremy
> > };
> >
> > #ifdef CONFIG_PM_SLEEP
> > @@ -29,7 +26,7 @@ extern const struct dev_pm_ops adt7316_pm_ops;
> > #else
> > #define ADT7316_PM_OPS NULL
> > #endif
> > -int adt7316_probe(struct device *dev, struct adt7316_bus *bus,
> > - const char *name);
> > +int adt7316_probe(struct device *dev, struct regmap *regmap, const char
> > *name,
> > + int irq);
> >
> > #endif
>
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
