On Tue, May 15 2018, Sergio Paracuellos wrote: > Gpio driver have a some globals which can be avoided just > using platform_data in a proper form. This commit adds a new > struct mtk_data which includes all of those globals setting them > using platform_set_drvdata and devm_gpiochip_add_data functions. > With this properly set we are able to retrieve driver data along > the code using kernel api's so globals are not needed anymore. > > Signed-off-by: Sergio Paracuellos <sergio.paracuel...@gmail.com> > --- > > I have not tested this because I don't hardware to do it but I > have compile it just to be sure it compiles. This patch needs
I've tested it. Doesn't work :-( Close though.
mtk_gpio_w32() needs the gpio_data, so it cannot be called before
devm_gpiochip_add_data() is called.
This:
diff --git a/drivers/staging/mt7621-gpio/gpio-mt7621.c
b/drivers/staging/mt7621-gpio/gpio-mt7621.c
index be27cbdcbfa8..48141d979059 100644
--- a/drivers/staging/mt7621-gpio/gpio-mt7621.c
+++ b/drivers/staging/mt7621-gpio/gpio-mt7621.c
@@ -185,9 +185,6 @@ mediatek_gpio_bank_probe(struct platform_device *pdev,
struct device_node *bank)
rg->chip.to_irq = mediatek_gpio_to_irq;
rg->bank = be32_to_cpu(*id);
- /* set polarity to low for all gpios */
- mtk_gpio_w32(rg, GPIO_REG_POL, 0);
-
ret = devm_gpiochip_add_data(&pdev->dev, &rg->chip, gpio_data);
if (ret < 0) {
dev_err(&pdev->dev, "Could not register gpio %d, ret=%d\n",
@@ -195,6 +192,9 @@ mediatek_gpio_bank_probe(struct platform_device *pdev,
struct device_node *bank)
return ret;
}
+ /* set polarity to low for all gpios */
+ mtk_gpio_w32(rg, GPIO_REG_POL, 0);
+
dev_info(&pdev->dev, "registering %d gpios\n", rg->chip.ngpio);
return gpiochip_add(&rg->chip);
makes it work. It probably won't work once I try interrupts as
mediatek_gpio_to_irq() also needs gpio_data, and that is currently
called early.
Also:
>
> static inline u32
> mtk_gpio_r32(struct mtk_gc *rg, u8 reg)
> {
> + struct mtk_data *gpio_data = gpiochip_get_data(&rg->chip);
> u32 offset = (reg * 0x10) + (rg->bank * 0x4);
>
> - return ioread32(mediatek_gpio_membase + offset);
> + return ioread32(gpio_data->gpio_membase + offset);
> }
>
This hunk doesn't apply.
The existing code is:
static inline u32
mtk_gpio_r32(struct mtk_gc *rg, u8 reg)
{
return ioread32(mediatek_gpio_membase + (reg * 0x10) + (rg->bank * 0x4));
}
Thanks!
NeilBrown
signature.asc
Description: PGP signature
_______________________________________________ devel mailing list de...@linuxdriverproject.org http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
