On Fri, 20 Apr 2018 20:41:44 -0400
Brian Masney <masn...@onstation.org> wrote:
> tsl2x7x_clear_interrupts() takes a reg argument but there are only
> two callers to this function and both callers pass the same value.
> Since this function was introduced, interrupts are now working
> properly for this driver, and several unnecessary calls to
> tsl2x7x_clear_interrupts() were removed. This patch removes the
> tsl2x7x_clear_interrupts() function and replaces the two callers
> with the i2c_smbus_write_byte() call instead.
>
> Signed-off-by: Brian Masney <masn...@onstation.org>
Applied
Thanks,
Jonathan
> ---
> drivers/staging/iio/light/tsl2x7x.c | 32 +++++++++++++++-----------------
> 1 file changed, 15 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/staging/iio/light/tsl2x7x.c
> b/drivers/staging/iio/light/tsl2x7x.c
> index 95a00b965c5e..f37fc74b8fbc 100644
> --- a/drivers/staging/iio/light/tsl2x7x.c
> +++ b/drivers/staging/iio/light/tsl2x7x.c
> @@ -271,20 +271,6 @@ static const u8 device_channel_config[] = {
> ALSPRX2
> };
>
> -static int tsl2x7x_clear_interrupts(struct tsl2X7X_chip *chip, int reg)
> -{
> - int ret;
> -
> - ret = i2c_smbus_write_byte(chip->client,
> - TSL2X7X_CMD_REG | TSL2X7X_CMD_SPL_FN | reg);
> - if (ret < 0)
> - dev_err(&chip->client->dev,
> - "%s: failed to clear interrupt status %x: %d\n",
> - __func__, reg, ret);
> -
> - return ret;
> -}
> -
> static int tsl2x7x_read_status(struct tsl2X7X_chip *chip)
> {
> int ret;
> @@ -714,9 +700,15 @@ static int tsl2x7x_chip_on(struct iio_dev *indio_dev)
> if (ret < 0)
> return ret;
>
> - ret = tsl2x7x_clear_interrupts(chip, TSL2X7X_CMD_PROXALS_INT_CLR);
> - if (ret < 0)
> + ret = i2c_smbus_write_byte(chip->client,
> + TSL2X7X_CMD_REG | TSL2X7X_CMD_SPL_FN |
> + TSL2X7X_CMD_PROXALS_INT_CLR);
> + if (ret < 0) {
> + dev_err(&chip->client->dev,
> + "%s: failed to clear interrupt status: %d\n",
> + __func__, ret);
> return ret;
> + }
>
> chip->tsl2x7x_chip_status = TSL2X7X_CHIP_WORKING;
>
> @@ -1341,7 +1333,13 @@ static irqreturn_t tsl2x7x_event_handler(int irq, void
> *private)
> timestamp);
> }
>
> - tsl2x7x_clear_interrupts(chip, TSL2X7X_CMD_PROXALS_INT_CLR);
> + ret = i2c_smbus_write_byte(chip->client,
> + TSL2X7X_CMD_REG | TSL2X7X_CMD_SPL_FN |
> + TSL2X7X_CMD_PROXALS_INT_CLR);
> + if (ret < 0)
> + dev_err(&chip->client->dev,
> + "%s: failed to clear interrupt status: %d\n",
> + __func__, ret);
>
> return IRQ_HANDLED;
> }
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
