Fixing the following checkpatch.pl errors and warning:
WARNING: Block comments use * on subsequent lines
CHECK: Please don't use multiple blank lines
CHECK: Alignment should match open parenthesis
CHECK: spaces preferred around that '<<'
CHECK: spaces preferred around that '-'
CHECK: Alignment should match open parenthesis
Signed-off-by: simran singhal <singhalsimr...@gmail.com>
---
drivers/staging/rtl8192u/r8180_93cx6.c | 71 ++++++++++++++++------------------
1 file changed, 33 insertions(+), 38 deletions(-)
diff --git a/drivers/staging/rtl8192u/r8180_93cx6.c
b/drivers/staging/rtl8192u/r8180_93cx6.c
index f35defc..6a293e3 100644
--- a/drivers/staging/rtl8192u/r8180_93cx6.c
+++ b/drivers/staging/rtl8192u/r8180_93cx6.c
@@ -1,22 +1,22 @@
/*
- This files contains card eeprom (93c46 or 93c56) programming routines,
- memory is addressed by 16 bits words.
-
- This is part of rtl8180 OpenSource driver.
- Copyright (C) Andrea Merello 2004 <andrea.mere...@gmail.com>
- Released under the terms of GPL (General Public Licence)
-
- Parts of this driver are based on the GPL part of the
- official realtek driver.
-
- Parts of this driver are based on the rtl8180 driver skeleton
- from Patric Schenke & Andres Salomon.
-
- Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver.
-
- We want to thank the Authors of those projects and the Ndiswrapper
- project Authors.
-*/
+ * This files contains card eeprom (93c46 or 93c56) programming routines,
+ * memory is addressed by 16 bits words.
+ *
+ * This is part of rtl8180 OpenSource driver.
+ * Copyright (C) Andrea Merello 2004 <andrea.mere...@gmail.com>
+ * Released under the terms of GPL (General Public Licence)
+ *
+ * Parts of this driver are based on the GPL part of the
+ * official realtek driver.
+ *
+ * Parts of this driver are based on the rtl8180 driver skeleton
+ * from Patric Schenke & Andres Salomon.
+ *
+ * Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver.
+ *
+ * We want to thank the Authors of those projects and the Ndiswrapper
+ * project Authors.
+ */
#include "r8180_93cx6.h"
@@ -39,7 +39,6 @@ static void eprom_cs(struct net_device *dev, short bit)
udelay(EPROM_DELAY);
}
-
static void eprom_ck_cycle(struct net_device *dev)
{
u8 cmdreg;
@@ -58,7 +57,6 @@ static void eprom_ck_cycle(struct net_device *dev)
udelay(EPROM_DELAY);
}
-
static void eprom_w(struct net_device *dev, short bit)
{
u8 cmdreg;
@@ -76,7 +74,6 @@ static void eprom_w(struct net_device *dev, short bit)
udelay(EPROM_DELAY);
}
-
static short eprom_r(struct net_device *dev)
{
u8 bit;
@@ -94,7 +91,6 @@ static short eprom_r(struct net_device *dev)
return 0;
}
-
static void eprom_send_bits_string(struct net_device *dev, short b[], int len)
{
int i;
@@ -105,7 +101,6 @@ static void eprom_send_bits_string(struct net_device *dev,
short b[], int len)
}
}
-
int eprom_read(struct net_device *dev, u32 addr)
{
struct r8192_priv *priv = ieee80211_priv(dev);
@@ -119,27 +114,27 @@ int eprom_read(struct net_device *dev, u32 addr)
ret = 0;
/* enable EPROM programming */
write_nic_byte_E(dev, EPROM_CMD,
- (EPROM_CMD_PROGRAM<<EPROM_CMD_OPERATING_MODE_SHIFT));
+ (EPROM_CMD_PROGRAM << EPROM_CMD_OPERATING_MODE_SHIFT));
force_pci_posting(dev);
udelay(EPROM_DELAY);
if (priv->epromtype == EPROM_93c56) {
addr_str[7] = addr & 1;
- addr_str[6] = addr & (1<<1);
- addr_str[5] = addr & (1<<2);
- addr_str[4] = addr & (1<<3);
- addr_str[3] = addr & (1<<4);
- addr_str[2] = addr & (1<<5);
- addr_str[1] = addr & (1<<6);
- addr_str[0] = addr & (1<<7);
+ addr_str[6] = addr & (1 << 1);
+ addr_str[5] = addr & (1 << 2);
+ addr_str[4] = addr & (1 << 3);
+ addr_str[3] = addr & (1 << 4);
+ addr_str[2] = addr & (1 << 5);
+ addr_str[1] = addr & (1 << 6);
+ addr_str[0] = addr & (1 << 7);
addr_len = 8;
} else {
addr_str[5] = addr & 1;
- addr_str[4] = addr & (1<<1);
- addr_str[3] = addr & (1<<2);
- addr_str[2] = addr & (1<<3);
- addr_str[1] = addr & (1<<4);
- addr_str[0] = addr & (1<<5);
+ addr_str[4] = addr & (1 << 1);
+ addr_str[3] = addr & (1 << 2);
+ addr_str[2] = addr & (1 << 3);
+ addr_str[1] = addr & (1 << 4);
+ addr_str[0] = addr & (1 << 5);
addr_len = 6;
}
eprom_cs(dev, 1);
@@ -162,7 +157,7 @@ int eprom_read(struct net_device *dev, u32 addr)
if (err < 0)
return err;
- ret |= err<<(15-i);
+ ret |= err << (15 - i);
}
eprom_cs(dev, 0);
@@ -170,6 +165,6 @@ int eprom_read(struct net_device *dev, u32 addr)
/* disable EPROM programming */
write_nic_byte_E(dev, EPROM_CMD,
- (EPROM_CMD_NORMAL<<EPROM_CMD_OPERATING_MODE_SHIFT));
+ (EPROM_CMD_NORMAL << EPROM_CMD_OPERATING_MODE_SHIFT));
return ret;
}
--
2.7.4
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
