On 01/04/2017 05:44 AM, Vladimir Zapolskiy wrote:
diff --git a/drivers/staging/media/imx/imx-csi.c
b/drivers/staging/media/imx/imx-csi.c
new file mode 100644
index 0000000..975eafb
--- /dev/null
+++ b/drivers/staging/media/imx/imx-csi.c
@@ -0,0 +1,638 @@
+/*
+ * V4L2 Capture CSI Subdev for Freescale i.MX5/6 SOC
+ *
+ * Copyright (c) 2014-2016 Mentor Graphics Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-subdev.h>
+#include <media/videobuf2-dma-contig.h>
+#include <media/v4l2-of.h>
+#include <media/v4l2-ctrls.h>
Please add the headers alphabetically ordered.
done.
+
+static int csi_start(struct csi_priv *priv)
+{
+ int ret;
+
+ if (!priv->sensor) {
+ v4l2_err(&priv->sd, "no sensor attached\n");
+ return -EINVAL;
+ }
+
+ ret = csi_setup(priv);
+ if (ret)
+ return ret;
+
+ /* start the frame interval monitor */
+ ret = imx_media_fim_set_stream(priv->fim, priv->sensor, true);
+ if (ret)
+ return ret;
+
+ ret = ipu_csi_enable(priv->csi);
+ if (ret) {
+ v4l2_err(&priv->sd, "CSI enable error: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
if (ret)
v4l2_err(&priv->sd, "CSI enable error: %d\n", ret);
return ret;
I failed to cleanup in this path, so it is now:
ret = ipu_csi_enable(priv->csi);
if (ret) {
v4l2_err(&priv->sd, "CSI enable error: %d\n", ret);
goto fim_off;
}
return 0;
fim_off:
if (priv->fim)
imx_media_fim_set_stream(priv->fim, priv->sensor, false);
return ret;
+
+static int csi_link_setup(struct media_entity *entity,
+ const struct media_pad *local,
+ const struct media_pad *remote, u32 flags)
+{
+ struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);
+ struct csi_priv *priv = v4l2_get_subdevdata(sd);
+ struct v4l2_subdev *remote_sd;
+
+ dev_dbg(priv->dev, "link setup %s -> %s", remote->entity->name,
+ local->entity->name);
+
+ remote_sd = media_entity_to_v4l2_subdev(remote->entity);
+
+ if (local->flags & MEDIA_PAD_FL_SINK) {
+ if (flags & MEDIA_LNK_FL_ENABLED) {
+ if (priv->src_sd)
+ return -EBUSY;
+ priv->src_sd = remote_sd;
+ } else {
+ priv->src_sd = NULL;
+ return 0;
You can remove the return above.
right, fixed.
+
+ ret = v4l2_async_register_subdev(&priv->sd);
+ if (ret)
+ goto free_ctrls;
+
+ return 0;
+free_ctrls:
+ v4l2_ctrl_handler_free(&priv->ctrl_hdlr);
+ return ret;
This is a functionally equal and simplified version:
if (ret)
v4l2_ctrl_handler_free(&priv->ctrl_hdlr);
return ret;
thanks, done.
+
+static struct platform_driver imx_csi_driver = {
+ .probe = imx_csi_probe,
+ .remove = imx_csi_remove,
+ .id_table = imx_csi_ids,
+ .driver = {
+ .name = "imx-ipuv3-csi",
+ .owner = THIS_MODULE,
Please drop .owner.
ok, I tested this and there are no regressions, done
for all modules.
Steve
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
