Correctly handle the settling time cycles value. The else branch was an impossible condition (> 1022 in the else branch of > 511) and the handling of the values was dividing by 2 and 4, with a left shift, instead of multiplying.
Based on the Table 13 at the bottom of Page 25 of the Data Sheet: http://www.analog.com/media/en/technical-documentation/data-sheets/AD5933.pdf Signed-off-by: Luis de Bethencourt <lui...@osg.samsung.com> --- Hi, I decided to use the hexadecimal values instead of (1 << 10) and (1 << 9), for briefness, I could resend using those instead if it is prefered. I also decided to use multiplications instead of right-shifts for readability. I could use change that as well. Thanks, Luis drivers/staging/iio/impedance-analyzer/ad5933.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/staging/iio/impedance-analyzer/ad5933.c b/drivers/staging/iio/impedance-analyzer/ad5933.c index 9f43976..3a2cf8f3 100644 --- a/drivers/staging/iio/impedance-analyzer/ad5933.c +++ b/drivers/staging/iio/impedance-analyzer/ad5933.c @@ -444,10 +444,13 @@ static ssize_t ad5933_store(struct device *dev, st->settling_cycles = val; /* 2x, 4x handling, see datasheet */ - if (val > 511) - val = (val >> 1) | (1 << 9); - else if (val > 1022) - val = (val >> 2) | (3 << 9); + if (val & 0x400 && val & 0x200) { + val &= 0x1ff; + val *= 4; + } else if (val & 0x200) { + val &= 0x1ff; + val *= 2; + } dat = cpu_to_be16(val); ret = ad5933_i2c_write(st->client, -- 2.5.1 _______________________________________________ devel mailing list de...@linuxdriverproject.org http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
