Remove HungarianCamelCase notation.
Signed-off-by: Mike Rapoport <mike.rapop...@gmail.com>
---
drivers/staging/sm750fb/ddk750_mode.c | 28 ++++++++++++++++------------
1 file changed, 16 insertions(+), 12 deletions(-)
diff --git a/drivers/staging/sm750fb/ddk750_mode.c
b/drivers/staging/sm750fb/ddk750_mode.c
index d0e3935..e7fc239 100644
--- a/drivers/staging/sm750fb/ddk750_mode.c
+++ b/drivers/staging/sm750fb/ddk750_mode.c
@@ -79,7 +79,7 @@ static int programModeRegisters(mode_parameter_t *pModeParam,
pll_value_t *pll)
{
int ret = 0;
int cnt = 0;
- unsigned int ulTmpValue, ulReg;
+ unsigned int tmp, reg;
if (pll->clockType == SECONDARY_PLL) {
/* programe secondary pixel clock */
@@ -101,26 +101,27 @@ static int programModeRegisters(mode_parameter_t
*pModeParam, pll_value_t *pll)
| FIELD_VALUE(0, CRT_VERTICAL_SYNC, START,
pModeParam->vertical_sync_start - 1));
- ulTmpValue = FIELD_VALUE(0, CRT_DISPLAY_CTRL, VSYNC_PHASE,
pModeParam->vertical_sync_polarity) |
+ tmp = FIELD_VALUE(0, CRT_DISPLAY_CTRL, VSYNC_PHASE,
+ pModeParam->vertical_sync_polarity) |
FIELD_VALUE(0, CRT_DISPLAY_CTRL,
HSYNC_PHASE, pModeParam->horizontal_sync_polarity) |
FIELD_SET(0, CRT_DISPLAY_CTRL,
TIMING, ENABLE) |
FIELD_SET(0, CRT_DISPLAY_CTRL, PLANE,
ENABLE);
if (getChipType() == SM750LE) {
- displayControlAdjust_SM750LE(pModeParam, ulTmpValue);
+ displayControlAdjust_SM750LE(pModeParam, tmp);
} else {
- ulReg = PEEK32(CRT_DISPLAY_CTRL)
+ reg = PEEK32(CRT_DISPLAY_CTRL)
& FIELD_CLEAR(CRT_DISPLAY_CTRL,
VSYNC_PHASE)
& FIELD_CLEAR(CRT_DISPLAY_CTRL,
HSYNC_PHASE)
& FIELD_CLEAR(CRT_DISPLAY_CTRL, TIMING)
& FIELD_CLEAR(CRT_DISPLAY_CTRL, PLANE);
- POKE32(CRT_DISPLAY_CTRL, ulTmpValue | ulReg);
+ POKE32(CRT_DISPLAY_CTRL, tmp | reg);
}
} else if (pll->clockType == PRIMARY_PLL) {
- unsigned int ulReservedBits;
+ unsigned int reserved;
POKE32(PANEL_PLL_CTRL, formatPllReg(pll));
@@ -140,18 +141,20 @@ static int programModeRegisters(mode_parameter_t
*pModeParam, pll_value_t *pll)
FIELD_VALUE(0, PANEL_VERTICAL_SYNC, HEIGHT,
pModeParam->vertical_sync_height)
| FIELD_VALUE(0, PANEL_VERTICAL_SYNC, START,
pModeParam->vertical_sync_start - 1));
- ulTmpValue = FIELD_VALUE(0, PANEL_DISPLAY_CTRL, VSYNC_PHASE,
pModeParam->vertical_sync_polarity) |
+ tmp = FIELD_VALUE(0, PANEL_DISPLAY_CTRL, VSYNC_PHASE,
+ pModeParam->vertical_sync_polarity) |
FIELD_VALUE(0, PANEL_DISPLAY_CTRL, HSYNC_PHASE,
pModeParam->horizontal_sync_polarity) |
FIELD_VALUE(0, PANEL_DISPLAY_CTRL, CLOCK_PHASE,
pModeParam->clock_phase_polarity) |
FIELD_SET(0, PANEL_DISPLAY_CTRL, TIMING, ENABLE) |
FIELD_SET(0, PANEL_DISPLAY_CTRL, PLANE, ENABLE);
- ulReservedBits = FIELD_SET(0, PANEL_DISPLAY_CTRL,
RESERVED_1_MASK, ENABLE) |
+ reserved = FIELD_SET(0, PANEL_DISPLAY_CTRL, RESERVED_1_MASK,
+ ENABLE) |
FIELD_SET(0, PANEL_DISPLAY_CTRL,
RESERVED_2_MASK, ENABLE) |
FIELD_SET(0, PANEL_DISPLAY_CTRL,
RESERVED_3_MASK, ENABLE) |
FIELD_SET(0, PANEL_DISPLAY_CTRL, VSYNC,
ACTIVE_LOW);
- ulReg = (PEEK32(PANEL_DISPLAY_CTRL) & ~ulReservedBits)
+ reg = (PEEK32(PANEL_DISPLAY_CTRL) & ~reserved)
& FIELD_CLEAR(PANEL_DISPLAY_CTRL, CLOCK_PHASE)
& FIELD_CLEAR(PANEL_DISPLAY_CTRL, VSYNC_PHASE)
& FIELD_CLEAR(PANEL_DISPLAY_CTRL, HSYNC_PHASE)
@@ -167,13 +170,14 @@ static int programModeRegisters(mode_parameter_t
*pModeParam, pll_value_t *pll)
* next vertical sync to turn on/off the plane.
*/
- POKE32(PANEL_DISPLAY_CTRL, ulTmpValue | ulReg);
+ POKE32(PANEL_DISPLAY_CTRL, tmp | reg);
- while ((PEEK32(PANEL_DISPLAY_CTRL) & ~ulReservedBits) !=
(ulTmpValue | ulReg)) {
+ while ((PEEK32(PANEL_DISPLAY_CTRL) & ~reserved) !=
+ (tmp | reg)) {
cnt++;
if (cnt > 1000)
break;
- POKE32(PANEL_DISPLAY_CTRL, ulTmpValue | ulReg);
+ POKE32(PANEL_DISPLAY_CTRL, tmp | reg);
}
} else {
ret = -1;
--
1.9.1
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
