This patch replaces u8CurrChannel with curr_channel to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun....@gmail.com>
---
V2: resend because 08/12 patch is changed.

 drivers/staging/wilc1000/wilc_wfi_cfgoperations.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c 
b/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c
index 1b31fec..f1e2d06 100644
--- a/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c
+++ b/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c
@@ -97,7 +97,7 @@ struct p2p_mgmt_data {
 /*Global variable used to state the current  connected STA channel*/
 u8 u8WLANChannel = INVALID_CHANNEL;
 
-u8 u8CurrChannel;
+u8 curr_channel;
 
 u8 u8P2P_oui[] = {0x50, 0x6f, 0x9A, 0x09};
 u8 u8P2Plocalrandom = 0x01;
@@ -670,7 +670,7 @@ static int set_channel(struct wiphy *wiphy,
        channelnum = ieee80211_frequency_to_channel(chandef->chan->center_freq);
        PRINT_D(CFG80211_DBG, "Setting channel %d with frequency %d\n", 
channelnum, chandef->chan->center_freq);
 
-       u8CurrChannel = channelnum;
+       curr_channel = channelnum;
        result = host_int_set_mac_chnl_num(priv->hWILCWFIDrv, channelnum);
 
        if (result != 0)
@@ -996,7 +996,7 @@ static int connect(struct wiphy *wiphy, struct net_device 
*dev,
        PRINT_INFO(CFG80211_DBG, "Group encryption value = %s\n Cipher Group = 
%s\n WPA version = %s\n",
                   pcgroup_encrypt_val, pccipher_group, pcwpa_version);
 
-       u8CurrChannel = pstrNetworkInfo->u8channel;
+       curr_channel = pstrNetworkInfo->u8channel;
 
        if (!pstrWFIDrv->u8P2PConnect) {
                u8WLANChannel = pstrNetworkInfo->u8channel;
@@ -2093,7 +2093,7 @@ void WILC_WFI_p2p_rx (struct net_device *dev, u8 *buff, 
u32 size)
                PRINT_D(GENERIC_DBG, "Rx Frame Type:%x\n", buff[FRAME_TYPE_ID]);
 
                /*Upper layer is informed that the frame is received on this 
freq*/
-               s32Freq = ieee80211_channel_to_frequency(u8CurrChannel, 
IEEE80211_BAND_2GHZ);
+               s32Freq = ieee80211_channel_to_frequency(curr_channel, 
IEEE80211_BAND_2GHZ);
 
                if (ieee80211_is_action(buff[FRAME_TYPE_ID])) {
                        PRINT_D(GENERIC_DBG, "Rx Action Frame Type: %x %x\n", 
buff[ACTION_SUBTYPE_ID], buff[P2P_PUB_ACTION_SUBTYPE]);
@@ -2273,7 +2273,7 @@ static int remain_on_channel(struct wiphy *wiphy,
                return s32Error;
        }
 
-       u8CurrChannel = chan->hw_value;
+       curr_channel = chan->hw_value;
 
        /*Setting params needed by WILC_WFI_RemainOnChannelExpired()*/
        priv->strRemainOnChanParams.pstrListenChan = chan;
@@ -2394,7 +2394,7 @@ static int mgmt_tx(struct wiphy *wiphy,
                        PRINT_D(GENERIC_DBG, "Setting channel: %d\n", 
chan->hw_value);
                        host_int_set_mac_chnl_num(priv->hWILCWFIDrv, 
chan->hw_value);
                        /*Save the current channel after we tune to it*/
-                       u8CurrChannel = chan->hw_value;
+                       curr_channel = chan->hw_value;
                } else if (ieee80211_is_action(mgmt->frame_control))   {
                        PRINT_D(GENERIC_DBG, "ACTION FRAME:%x\n", 
(u16)mgmt->frame_control);
 
@@ -2409,7 +2409,7 @@ static int mgmt_tx(struct wiphy *wiphy,
                                        PRINT_D(GENERIC_DBG, "Setting channel: 
%d\n", chan->hw_value);
                                        
host_int_set_mac_chnl_num(priv->hWILCWFIDrv, chan->hw_value);
                                        /*Save the current channel after we 
tune to it*/
-                                       u8CurrChannel = chan->hw_value;
+                                       curr_channel = chan->hw_value;
                                }
                                switch (buf[ACTION_SUBTYPE_ID]) {
                                case GAS_INTIAL_REQ:
-- 
2.6.0

_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

Reply via email to