On 28/12/14 18:56, Andreas Siegling wrote:
This patch will fix the following checkpatch errors/warnings in
drivers/staging/comedi/ which are brought by wrong spacing:
ERROR: trailing whitespace
ERROR: space prohibited before that ',' (ctx:WxW)
WARNING: please, no space before tabs
Signed-off-by: Andreas Siegling <andreas.siegl...@fau.de>
Signed-off-by: Zhutao Lu <lvzhu...@gmail.com>
---
drivers/staging/comedi/drivers/daqboard2000.c | 2 +-
drivers/staging/comedi/drivers/das16m1.c | 2 +-
drivers/staging/comedi/drivers/ni_at_a2150.c | 2 +-
drivers/staging/comedi/drivers/ni_stc.h | 4 ++--
drivers/staging/comedi/drivers/s626.c | 2 +-
5 files changed, 6 insertions(+), 6 deletions(-)
Those should really be split into separate patches, but as for your
PATCH 1/3 it's not worth fixing up the comments this way as they need
reformatting anyway.
diff --git a/drivers/staging/comedi/drivers/ni_at_a2150.c
b/drivers/staging/comedi/drivers/ni_at_a2150.c
index 69e543a..bff4852 100644
--- a/drivers/staging/comedi/drivers/ni_at_a2150.c
+++ b/drivers/staging/comedi/drivers/ni_at_a2150.c
@@ -108,7 +108,7 @@ TRIG_WAKE_EOS
#define IRQ_LVL_BITS(x) (((x) & 0xf) << 4) /* sets irq
level */
#define FIFO_INTR_EN_BIT 0x100 /* enable fifo interrupts */
#define FIFO_INTR_FHF_BIT 0x200 /* interrupt fifo half full */
-#define DMA_INTR_EN_BIT 0x800 /* enable interrupt on dma
terminal count */
+#define DMA_INTR_EN_BIT 0x800 /* enable interrupt on dma
terminal count */
#define DMA_DEM_EN_BIT 0x1000 /* enables demand mode dma */
#define I8253_BASE_REG 0x14
#define I8253_MODE_REG 0x17
diff --git a/drivers/staging/comedi/drivers/ni_stc.h
b/drivers/staging/comedi/drivers/ni_stc.h
index bd69c3f..bb76fe1 100644
--- a/drivers/staging/comedi/drivers/ni_stc.h
+++ b/drivers/staging/comedi/drivers/ni_stc.h
@@ -166,7 +166,7 @@ enum Interrupt_B_Ack_Bits {
#define AI_SCAN_IN_PROG_Pulse _bit4
#define AI_EXTMUX_CLK_Pulse _bit3
#define AI_LOCALMUX_CLK_Pulse _bit2
-#define AI_SC_TC_Pulse _bit1
+#define AI_SC_TC_Pulse _bit1
#define AI_CONVERT_Pulse _bit0
#define AO_Command_1_Register 9
@@ -642,7 +642,7 @@ static unsigned AO_UPDATE_Output_Select(enum
ao_update_output_selection
#define G_Load_Source_Select _bit7
#define G_Reload_Source_Switching _bit15
#define G_Loading_On_Gate _bit14
-#define G_Gate_Polarity _bit13
+#define G_Gate_Polarity _bit13
#define G_Counting_Once(a) (((a)&0x03)<<10)
#define G_Stop_Mode(a) (((a)&0x03)<<5)
Those parts of the patch are okay.
diff --git a/drivers/staging/comedi/drivers/s626.c
b/drivers/staging/comedi/drivers/s626.c
index 14932c5..fc497dd 100644
--- a/drivers/staging/comedi/drivers/s626.c
+++ b/drivers/staging/comedi/drivers/s626.c
@@ -118,7 +118,7 @@ static void s626_mc_enable(struct comedi_device *dev,
static void s626_mc_disable(struct comedi_device *dev,
unsigned int cmd, unsigned int reg)
{
- writel(cmd << 16 , dev->mmio + reg);
+ writel(cmd << 16, dev->mmio + reg);
mmiowb();
}
That part of the patch has also been tackled in a separate patch by
jitendra kumar khasdev. Your patch predates it, but jitendra's patch is
split better.
--
-=( Ian Abbott @ MEV Ltd. E-mail: <abbo...@mev.co.uk> )=-
-=( Web: http://www.mev.co.uk/ )=-
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
