On Fri, Apr 30, 2021 at 07:33:27PM +0300, Sakari Ailus wrote:
> Hi Deepak,
> 
> If you're touching all these lines, I might do a little more. Please see
> the comments below.
> 
Hello Sakari,
I can definitely include other changes, but then it will be many different
types of changes into a single patch. Will that be okay?

I was planning to address one issue per patch as I think the volume of
change is going to be high.  I mentioned that in the notes section of the patch
message.

Let me know if you still suggest I combine those.

Thank you,
deepak.



> On Fri, Apr 30, 2021 at 09:10:12PM +0530, Deepak R Varma wrote:
> > Misplaced braces makes it difficult to follow the code easily. This also
> > goes against the code style guidelines. This resolved following checkpatch
> > complaints:
> > 
> > ERROR: open brace '{' following function definitions go on the next line
> > ERROR: that open brace { should be on the previous line
> > 
> > Signed-off-by: Deepak R Varma <d...@mailo.com>
> > ---
> > 
> > Please Note: There are several other checkpatch triggered warnings and
> > errors that should be addressed in separate patches.
> > 
> > 
> >  .../staging/media/atomisp/pci/atomisp_csi2.c  |   3 +-
> >  .../staging/media/atomisp/pci/sh_css_mipi.c   |  69 +++----
> >  .../staging/media/atomisp/pci/sh_css_params.c | 171 ++++++++----------
> >  drivers/staging/media/atomisp/pci/sh_css_sp.c | 108 +++++------
> >  .../media/atomisp/pci/sh_css_version.c        |   3 +-
> >  5 files changed, 157 insertions(+), 197 deletions(-)
> > 
> > diff --git a/drivers/staging/media/atomisp/pci/atomisp_csi2.c 
> > b/drivers/staging/media/atomisp/pci/atomisp_csi2.c
> > index 060b8765ae96..200f16994f3a 100644
> > --- a/drivers/staging/media/atomisp/pci/atomisp_csi2.c
> > +++ b/drivers/staging/media/atomisp/pci/atomisp_csi2.c
> > @@ -29,7 +29,8 @@ static struct v4l2_mbus_framefmt *__csi2_get_format(struct
> >     v4l2_subdev_pad_config *cfg,
> >     enum
> >     v4l2_subdev_format_whence
> 
> You could have more arguments on the same line up to 80 characters per
> line.
> 
> > -   which, unsigned int pad) {
> > +   which, unsigned int pad)
> > +{
> >     if (which == V4L2_SUBDEV_FORMAT_TRY)
> >             return v4l2_subdev_get_try_format(&csi2->subdev, cfg, pad);
> >     else
> > diff --git a/drivers/staging/media/atomisp/pci/sh_css_mipi.c 
> > b/drivers/staging/media/atomisp/pci/sh_css_mipi.c
> > index 3f34cc81be87..75489f7d75ee 100644
> > --- a/drivers/staging/media/atomisp/pci/sh_css_mipi.c
> > +++ b/drivers/staging/media/atomisp/pci/sh_css_mipi.c
> > @@ -91,7 +91,8 @@ ia_css_mipi_frame_calculate_size(const unsigned int width,
> >                              const enum atomisp_input_format format,
> >                              const bool hasSOLandEOL,
> >                              const unsigned int embedded_data_size_words,
> > -                            unsigned int *size_mem_words) {
> > +                            unsigned int *size_mem_words)
> > +{
> >     int err = 0;
> >  
> >     unsigned int bits_per_pixel = 0;
> > @@ -118,8 +119,7 @@ ia_css_mipi_frame_calculate_size(const unsigned int 
> > width,
> >     IA_CSS_ENTER("padded_width=%d, height=%d, format=%d, hasSOLandEOL=%d, 
> > embedded_data_size_words=%d\n",
> >                  width_padded, height, format, hasSOLandEOL, 
> > embedded_data_size_words);
> >  
> > -   switch (format)
> > -   {
> > +   switch (format) {
> >     case ATOMISP_INPUT_FORMAT_RAW_6:                /* 4p, 3B, 24bits */
> >             bits_per_pixel = 6;
> >             break;
> > @@ -178,12 +178,10 @@ ia_css_mipi_frame_calculate_size(const unsigned int 
> > width,
> >     /* Even lines for YUV420 formats are double in bits_per_pixel. */
> >     if (format == ATOMISP_INPUT_FORMAT_YUV420_8
> >         || format == ATOMISP_INPUT_FORMAT_YUV420_10
> > -       || format == ATOMISP_INPUT_FORMAT_YUV420_16)
> > -   {
> > +       || format == ATOMISP_INPUT_FORMAT_YUV420_16) {
> >             even_line_bytes = (width_padded * 2 * bits_per_pixel + 7) >>
> >                     3; /* ceil ( bits per line / 8) */
> > -   } else
> > -   {
> > +   } else {
> >             even_line_bytes = odd_line_bytes;
> >     }
> >  
> > @@ -236,7 +234,8 @@ ia_css_mipi_frame_calculate_size(const unsigned int 
> > width,
> >  #if !defined(ISP2401)
> >  int
> >  ia_css_mipi_frame_enable_check_on_size(const enum mipi_port_id port,
> > -                                  const unsigned int       size_mem_words) 
> > {
> > +                                  const unsigned int       size_mem_words)
> 
> Tab after int, should be a space.
> 
> > +{
> >     u32 idx;
> >  
> >     int err = -EBUSY;
> > @@ -246,11 +245,9 @@ ia_css_mipi_frame_enable_check_on_size(const enum 
> > mipi_port_id port,
> >  
> >     for (idx = 0; idx < IA_CSS_MIPI_SIZE_CHECK_MAX_NOF_ENTRIES_PER_PORT &&
> >          my_css.mipi_sizes_for_check[port][idx] != 0;
> > -        idx++)   /* do nothing */
> > -   {
> > +        idx++) { /* do nothing */
> >     }
> 
> A semicolon suffices here. I guess this could be also written as:
> 
>       for (idx = 0; idx < ... & ... != 0; )
>               idx++;
> 
> As it's easy to just miss the semicolon at the end of the for loop.
> 
> > -   if (idx < IA_CSS_MIPI_SIZE_CHECK_MAX_NOF_ENTRIES_PER_PORT)
> > -   {
> > +   if (idx < IA_CSS_MIPI_SIZE_CHECK_MAX_NOF_ENTRIES_PER_PORT) {
> >             my_css.mipi_sizes_for_check[port][idx] = size_mem_words;
> >             err = 0;
> >     }
> > @@ -271,7 +268,8 @@ mipi_init(void)
> >  int
> >  calculate_mipi_buff_size(
> >      struct ia_css_stream_config *stream_cfg,
> > -    unsigned int *size_mem_words) {
> > +    unsigned int *size_mem_words)
> 
> I think both arguments might fit on the same line. If not, then the return
> type (int) does. I think there are other similar cases.
> 
> > +{
> >  #if !defined(ISP2401)
> >     int err = -EINVAL;
> >     (void)stream_cfg;
> > @@ -346,12 +344,10 @@ calculate_mipi_buff_size(
> >  
> >     /* Even lines for YUV420 formats are double in bits_per_pixel. */
> >     if (format == ATOMISP_INPUT_FORMAT_YUV420_8
> > -       || format == ATOMISP_INPUT_FORMAT_YUV420_10)
> > -   {
> > +       || format == ATOMISP_INPUT_FORMAT_YUV420_10) {
> >             even_line_bytes = (width_padded * 2 * bits_per_pixel + 7) >>
> >                     3; /* ceil ( bits per line / 8) */
> 
> You don't need braces here.
> 
> > -   } else
> > -   {
> > +   } else {
> >             even_line_bytes = odd_line_bytes;
> >     }
> >  
> > @@ -393,7 +389,8 @@ static bool buffers_needed(struct ia_css_pipe *pipe)
> >  
> >  int
> >  allocate_mipi_frames(struct ia_css_pipe *pipe,
> > -                struct ia_css_stream_info *info) {
> > +                struct ia_css_stream_info *info)
> > +{
> >     int err = -EINVAL;
> >     unsigned int port;
> >  
> > @@ -402,8 +399,7 @@ allocate_mipi_frames(struct ia_css_pipe *pipe,
> >  
> >     assert(pipe);
> >     assert(pipe->stream);
> > -   if ((!pipe) || (!pipe->stream))
> > -   {
> > +   if ((!pipe) || (!pipe->stream)) {
> 
> Extra parentheses.
> 
> -- 
> Kind regards,
> 
> Sakari Ailus


_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

Reply via email to